Brand new JDM big ports ported and polished
06 July 2017, 08:36 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Hertfordshire
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Brand new JDM big ports ported and polished
Paul finch ported and polished
These items were brand new from Roger Clark motorsport by myself
They have had 14mm conversion
If you want for v9+ sti I also have a set of fast road RCM cams custom for later pickup cam specs
278 duration 10.74 lift
274 duration 9.98
Equal to cosworth and lateral lp10 I believe (maybe wrong)
I also have RCM titanium exhaust pulleys!!!! Would rather do deal together!!
Heads £1600
Cams £750
Pulleys £sold
These items were brand new from Roger Clark motorsport by myself
They have had 14mm conversion
If you want for v9+ sti I also have a set of fast road RCM cams custom for later pickup cam specs
278 duration 10.74 lift
274 duration 9.98
Equal to cosworth and lateral lp10 I believe (maybe wrong)
I also have RCM titanium exhaust pulleys!!!! Would rather do deal together!!
Heads £1600
Cams £750
Pulleys £sold
Last edited by Jampot; 08 July 2017 at 11:50 PM.
06 July 2017, 08:47 PM
#2
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Hertfordshire
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
http://rogerclarkmotorsport.co.uk/st...head-left-hand
I don't have photos of heads sorry they are at Paul Finches
This Is a link to what I purchased remember I have had them ported and they have 14mm conversion.
I don't have photos of heads sorry they are at Paul Finches
This Is a link to what I purchased remember I have had them ported and they have 14mm conversion.
09 July 2017, 10:35 AM
#6
Did the jdm spec C heads change when the 09 hatch specC came out, or was it given more restricted heads, as the rcm description suggests? I only ask because I am trying to get to the bottom of an issue, and if I did have cracking around the threads I would be interested in these ones, but it would be a few weeks before I can find out. Ta
Trending Topics
09 July 2017, 06:11 PM
#8
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Hertfordshire
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
No Cams are for uk heads in JDM heads
The pick up is different. You can modify the heads to move sensor into position or these RCM cams have the pick up location in the correct position.
I do not actually know I know the heads changed as told earlier a were better (these are early heads)
The pick up is different. You can modify the heads to move sensor into position or these RCM cams have the pick up location in the correct position.
Did the jdm spec C heads change when the 09 hatch specC came out, or was it given more restricted heads, as the rcm description suggests? I only ask because I am trying to get to the bottom of an issue, and if I did have cracking around the threads I would be interested in these ones, but it would be a few weeks before I can find out. Ta
09 July 2017, 06:18 PM
#9
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Hertfordshire
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Regarding heads they have had the throats manipulated via CNC to allow max flow.
All mold flashes have been addressed.
The head and cam combination we happily support big numbers.
The big advantage of these heads is the volume they will be capable of flowing high up the rev range so power band won't just die off!
All mold flashes have been addressed.
The head and cam combination we happily support big numbers.
The big advantage of these heads is the volume they will be capable of flowing high up the rev range so power band won't just die off!
09 July 2017, 11:15 PM
#11
Scooby Regular
Join Date: May 2008
Location: Warrington
Posts: 632
Likes: 0
Received 0 Likes
on
0 Posts
Hi mate, think you might want to adjust your prices slightly as the heads are only £1450 brand new from import car parts.
https://importcarparts.co.uk/parts-info?id=12776&cat=96&sub=183&sec=385&var=33&dc=0&g en=&searchKey=&searchPart=
Good luck with the sale.
https://importcarparts.co.uk/parts-info?id=12776&cat=96&sub=183&sec=385&var=33&dc=0&g en=&searchKey=&searchPart=
Good luck with the sale.
10 July 2017, 06:12 AM
#12
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Hertfordshire
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Hi mate, think you might want to adjust your prices slightly as the heads are only £1450 brand new from import car parts.
https://importcarparts.co.uk/parts-i...y=&searchPart=
Good luck with the sale.
https://importcarparts.co.uk/parts-i...y=&searchPart=
Good luck with the sale.
I can prove what I paid, and have been told that mine are indeed the proper ones.
At this moment in time No price adjustment is required
10 July 2017, 06:21 AM
#13
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Hertfordshire
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Again link to heads
http://rogerclarkmotorsport.co.uk/st...head-left-hand
And even working on them prices with the work done on my heads makes them cheaper at my price than you buying and doing the work! ��
http://rogerclarkmotorsport.co.uk/st...head-left-hand
And even working on them prices with the work done on my heads makes them cheaper at my price than you buying and doing the work! ��
10 July 2017, 06:49 AM
#15
Scooby Regular
Join Date: May 2008
Location: Warrington
Posts: 632
Likes: 0
Received 0 Likes
on
0 Posts
10 July 2017, 07:38 AM
#16
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Hertfordshire
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
No it's fine, before I posted I did work out cost with your heads and machining, I may have adjusted price if after work done and price had exceeded. But it doesn't.
I can only say what I've been told and that's there are different variations of the JDM big ports. These are the desired ones.
10 July 2017, 07:06 PM
#18
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Hertfordshire
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Even what I'm asking for money wise it works out cheaper buying mine than buying the others and having the machining done on them.
