EJ207 AVCS 2.0 Forged Long Block - JDM STI V7
23 October 2016, 12:18 PM
#1
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Aug 2012
Location: Fareham, Hampshire
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
EJ207 AVCS 2.0 Forged Long Block - JDM STI V7
Rebuilt back in February and has covered just under 3000 miles. Ran at 430bhp & 383ftlbs with an SC42 turbo. Could do with a good clean though.
It was run in for just over 1500 miles at roughly 200bhp before full power map to which the mapper commented on how sweet the engine ran.
My car has been written off from a hard rear end hit and I can't afford to reshell it so unfortunately this engine has to go.
Mahle 4032 forged pistons
STI Forged Rods
STI Forged Crank
Acl race bearings
King racing shells
Advanced automotive modified 10mm oil pump
Spec C sump
High flow 77 degree thermostat
NGK PFR7B plugs
CDF ali crank pulley
Was run in on Millers Oils CRO 10w-40 Competition Running In Mineral Oil. Then run on Millers Oils NANODRIVE CFS 10w-50
Good for roughly 500bhp
I have loads of pictures from the rebuild which i will happily email the buyer, here's a couple:
£2100 Could possibly arrange a courier.
It was run in for just over 1500 miles at roughly 200bhp before full power map to which the mapper commented on how sweet the engine ran.
My car has been written off from a hard rear end hit and I can't afford to reshell it so unfortunately this engine has to go.
Mahle 4032 forged pistons
STI Forged Rods
STI Forged Crank
Acl race bearings
King racing shells
Advanced automotive modified 10mm oil pump
Spec C sump
High flow 77 degree thermostat
NGK PFR7B plugs
CDF ali crank pulley
Was run in on Millers Oils CRO 10w-40 Competition Running In Mineral Oil. Then run on Millers Oils NANODRIVE CFS 10w-50
Good for roughly 500bhp
I have loads of pictures from the rebuild which i will happily email the buyer, here's a couple:
£2100 Could possibly arrange a courier.
Last edited by kshoughton; 23 October 2016 at 06:45 PM.
