competition spec forged engine
Thread Starter
Scooby Regular
iTrader: (3)
Joined: May 2014
Posts: 64
Likes: 0
From: setland islands
competition spec forged engine. ***£2100***
engine spec...
Phase-1 closed deck block, JE pistons which were match bored to each cylinder so 40-thou clearances are microscopically perfect, eagle H-beam rods which were shot-peened and reground for extra strength, ARP head studs, ACL bearings all round, lowered compression along with the extra clearances to allow for 600+bhp worth of piston crown expansion, Rcm modified 10mm oil pump, cometic head gaskets, ported and pollished heads, ported intake manifold, ported throttle body, there has been tons of profesional work done on this engine with a folder full of reciepts and notes to prove everything, the engine was run in properly ad has not even done 1000 miles since. finances have stopped the build and has forced the car to be broken before the project was finished,
this is a bullet proof engine ready for massive horsepower,
Priced to sell at £2500 plus shipping.
this will come as a long engine with heads, manifold, throttlebody, sump ect,
does not come with flywheel, turbo, headers or injectors.
Phase-1 closed deck block, JE pistons which were match bored to each cylinder so 40-thou clearances are microscopically perfect, eagle H-beam rods which were shot-peened and reground for extra strength, ARP head studs, ACL bearings all round, lowered compression along with the extra clearances to allow for 600+bhp worth of piston crown expansion, Rcm modified 10mm oil pump, cometic head gaskets, ported and pollished heads, ported intake manifold, ported throttle body, there has been tons of profesional work done on this engine with a folder full of reciepts and notes to prove everything, the engine was run in properly ad has not even done 1000 miles since. finances have stopped the build and has forced the car to be broken before the project was finished,
this is a bullet proof engine ready for massive horsepower,
Priced to sell at £2500 plus shipping.
this will come as a long engine with heads, manifold, throttlebody, sump ect,
does not come with flywheel, turbo, headers or injectors.
Last edited by shetland-lass; Jan 15, 2015 at 09:49 PM.
Thread Starter
Scooby Regular
iTrader: (3)
Joined: May 2014
Posts: 64
Likes: 0
From: setland islands
Engine was built for an aircraft pilot that was building a car. His plans changed and I have ended up with the lot. But I don't have funds to finish the project so the entire car will be stripped.
I have loads more photos
Pm me mobile numbers and I can send loads across
I have loads more photos
Pm me mobile numbers and I can send loads across
Trending Topics
Thread Starter
Scooby Regular
iTrader: (3)
Joined: May 2014
Posts: 64
Likes: 0
From: setland islands
All the block work was carried out by a company in Edinburgh called engine services and components. The heads and all other parts were fitted by the owner. He was a perfectionist and before this actually build an airplane from scratch and flew it at his place of work tingwall airport so he knows his stuff, he used to drive in the last with Andy forest. There is a complete folder of notes and writings from the build. It's the most precision I have seen ever. This isn't your standard forged build with a set of pistons and rods in a block.. The time and workmanship in this makes it one of a kind. Be assured it's built to last and make amazing power, I have all the relevant paperwork, invoices and reciepts from the build.
