MicaLee

I am after fitting a P1 front splitter to a 94 classic. DR Motorsport do replicas which fit straight on. Not having ever fitted a piece of bodywork, has anyone fitted these before and could give me some tips.

Thanks

Krade

I have had loads of bits from DR Motorsport, 2 front lips, spoliers vents ect, all bits are made to a high quality andhave a great paint finish.

After offering the front lip up its really just a case of drilling a cple of holes to screw it to the bumper and a bit of silicon sealant along the underside of the front so it sticks to the bumer. Not totally nessecary but better safe than sorry

Heres mine Fitted to my car

scooby-tc

iTrader: (2)

Ive also had many parts from drmotorsport IMO you cant beat them for quality and as krade says its just a case of drilling 2 small holes each side of the bumper and screwing the splitter in place.

Krade

Also mine is the P1 Style.
TC's is the P1 Replica. Main diff is the replica sits under and over the bumper rather than just on top and it has the 2 lumps under no plate and the tow eye, which the P1 style doesn't.