hi need some advice on fitting a bumper i have a new one cause mines all stracthed from stones and stuff any advice will be useful.

 

If its the front one on a classic

1. Two bolts eigther side just inside the inner wing
2. Remove fog lights and indicators
3. Remove sidelights and Headlights
4. Two bolts under the front skirt inline with the fogs
5. Two bolts on the number plate mounting
6. About 8 black plastic clips on the top of the bumber under were the headlights used to be
7. One bold in the centre of the bumber at the bottom on an L bracket

Then with a bit of jiggling it will slide off...



[Edited by BAH - 5/26/2003 6:54:42 PM]