What did you do to your scooby today....
#32
Scooby Regular
Fitted a replacement electric window motor in my drivers door (Thanks MB Developments).
Only after it stopped working did I realize just how much I hate driving without having my window open.
Only after it stopped working did I realize just how much I hate driving without having my window open.
#39
Scooby Regular
Thread Starter
Join Date: Nov 2005
Location: m25 and surroundin areas......need 500+horses again!!!
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Not today, but this whole week ive been collecting service parts.
Oil and filter and sump washer
Diff oil and washer
Gearbox oil and washer
Spark plugs
Brake fluid
Pollen filter fuel filter
Anti-freeze change
washer fluid top up
Last night i removed the spoiler to check for the common rust around the boot lid to spoiler join. Now to rust proof and spray the boot lid. Clean the underside of the spoiler and re-fit.
After painting im getting my map looked at. Probably get the service done first even though its not needed as my car had its last service 3k miles ago
Oil and filter and sump washer
Diff oil and washer
Gearbox oil and washer
Spark plugs
Brake fluid
Pollen filter fuel filter
Anti-freeze change
washer fluid top up
Last night i removed the spoiler to check for the common rust around the boot lid to spoiler join. Now to rust proof and spray the boot lid. Clean the underside of the spoiler and re-fit.
After painting im getting my map looked at. Probably get the service done first even though its not needed as my car had its last service 3k miles ago
#44
Scooby Regular
Bit of prep on the Bug for winter. 4 new tyres, fluids, coilovers, new seals on rear diff as they can take a beating in winter, cam belt/tensioner, water pump etc. New rocker cover gaskets & RCM half moons, thermostat. Went in yesterday, finished later on today, technically though I’ve not done it! I’ve just paid to have it done 😂. Ready for snow though so best not be disappointed this year!!!!!
#45
Scooby Regular
sorry mate but what you going on about ????
subaru group A roof vents same as on the group a rally car ,,,boot led's ???? ,,, do you mean the light bar on the bonnet ??? ,, you tend to need them on a rally car for night stages lol
subaru group A roof vents same as on the group a rally car ,,,boot led's ???? ,,, do you mean the light bar on the bonnet ??? ,, you tend to need them on a rally car for night stages lol
#46
Scooby Regular
#47
Scooby Regular
iTrader: (1)
I lied they were £3.69 delivered.
https://m.ebay.co.uk/itm/CAR-MAT-CAR...EAAOSwa-dWi7o0
You'll have to put 2 wholes in your mat if it doesn't have a pre made fix point, but the clips are sound and work really well for the money.
https://m.ebay.co.uk/itm/CAR-MAT-CAR...EAAOSwa-dWi7o0
You'll have to put 2 wholes in your mat if it doesn't have a pre made fix point, but the clips are sound and work really well for the money.
Last edited by Fishbowlhead; 17 November 2017 at 06:08 PM.
#48
Scooby Regular
I lied they were £3.69 delivered.
https://m.ebay.co.uk/itm/CAR-MAT-CAR...EAAOSwa-dWi7o0
You'll have to put 2 wholes in your mat if it doesn't have a pre made fix point, but the clips are sound and work really well for the money.
https://m.ebay.co.uk/itm/CAR-MAT-CAR...EAAOSwa-dWi7o0
You'll have to put 2 wholes in your mat if it doesn't have a pre made fix point, but the clips are sound and work really well for the money.
#49
Scooby Regular
Thanks both. I have the version Don shows on the left (old) but it doesn't hold the mat very well. I still have to move it back on to the clip everytime I get in the car!
#54
Hi. Yes did them myself. As they are aluminium. I used 3 coats of etch primer, then used this red in VHT. Clear VHT lacquer is yet to be applied once I paint the AP logo in white. All seals ad pistons are being replaced. Are you thinking of doing yours ?
Got the alloys refurbished too. Will compliment the Calipers nicely.
Last edited by ae82mad; 19 November 2017 at 12:18 PM.
#55
Scooby Regular
Thread Starter
Join Date: Nov 2005
Location: m25 and surroundin areas......need 500+horses again!!!
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Hi. Yes did them myself. As they are aluminium. I used 3 coats of etch primer, then used this red in VHT. Clear VHT lacquer is yet to be applied once I paint the AP logo in white. All seals ad pistons are being replaced. Are you thinking of doing yours ?
Got the alloys refurbished too. Will compliment the Calipers nicely.
Clear your inbox dude
Last edited by subarustel; 19 November 2017 at 05:13 PM.
#56
Also genuine new centre caps.
Last edited by ae82mad; 19 November 2017 at 07:20 PM.
#57
Scooby Regular
Thread Starter
Join Date: Nov 2005
Location: m25 and surroundin areas......need 500+horses again!!!
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Was thinking you could paint my calipers. Help you pay for the club subscription
#58
https://youtu.be/jf6Z3m8bZlU
#59
Scooby Regular
Thread Starter
Join Date: Nov 2005
Location: m25 and surroundin areas......need 500+horses again!!!
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Will be a tad more than a years subscription if I was to do your Calipers. Lol. Got some VHT paint here to sell if you want to have a crack yourself. Bought one too many. Same as this paint being used in this video
https://youtu.be/jf6Z3m8bZlU
https://youtu.be/jf6Z3m8bZlU