Notices
Subaru Parts This forum contains Subaru parts offered for sale by our members only.

MD321T Billet Turbo & Supporting Mods & Sti Engine

Thread Tools
 
Search this Thread
 
Old Dec 17, 2015 | 09:48 PM
  #1  
Dubzy's Avatar
Dubzy
Thread Starter
Scooby Regular
iTrader: (4)
 
Joined: May 2009
Posts: 979
Likes: 3
From: In the middle
Default MD321T Billet Turbo & Supporting Mods & Sti Engine

All listed parts are still on the car and will be removed early in the new year. The engine / turbo can be seen and heard running prior to removal for peace of mind. All items are in perfect working order and are only being removed due to a new 2.35 motor going in and im also converting to a rotated setup.

MD321T Billet Turbo with a Zircotec ceramic coated exhaust housing.
I purchased this turbo in August last year from a respected member of the Subaru community. He purchased the turbo new from Mark at Lateral Performance at the cost of £1750 and only used the turbo for 1K miles, most of which were to run in a new engine before deciding to go for a larger turbo setup.
I have covered another 6k miles since i purchased it so its only covered 7k miles from new and as such is still in perfect working order. On my current 2.0 setup it makes 446bhp on v-power at 1.7bar. I have the original build sheet and receipt from when i purchased it.... £900 ( SOLD)

Harvey Smith (Trick) 3 bolt up pipe, covered less than 5k miles ...£80 SOLD

Sard 650cc Fuel Injectors, newage fitment, perfect working order.... £150

SFS Silicon Intake Pipe, newage fitment (red) quality part in good used condition...£70 (£240 new from scoobyworld) Sold

RCM Induction Kit. Newage fitment, covered less than 5k... £90 (£210 new) Sold

2004 Sti Long Motor. Covered 86k, full service history, 100% reliable and well looked after engine. Starts first time every time with, no nasty knocks or rattles, no oil or coolant usage. This was a stock motor until 80k when i purchased the car. Before i had the car remapped to suit the above turbo i had it checked over by Mark at TDR (Thwaites Developments Racing), the engine was and still is performing perfectly, runs very quiet and makes the power its expected to make. Long engine only so no ancillaries etc, the heads and block will be left assembled so a nice easy straight drop in for somebody on a budget.
Can be seen and heard running.. £800 SOLD

Collection preferred from Redditch or Warwick, postage and paypal fees to be added.

Im also looking for a rotated exhaust setup and a set of large (1000cc+) top feed injectors that i would take into a deal

.


Last edited by Dubzy; Jan 4, 2016 at 05:49 PM.
Reply
Old Dec 17, 2015 | 10:02 PM
  #2  
GONZO01's Avatar
GONZO01
Scooby Regular
15 Year Member
Liked
iTrader: (6)
 
Joined: Feb 2007
Posts: 1,509
Likes: 1
From: South Wales,Swansea.
Default

YHPM
Reply
Old Dec 17, 2015 | 10:15 PM
  #3  
RICH_JDM_STI's Avatar
RICH_JDM_STI
Scooby Regular
iTrader: (2)
 
Joined: Oct 2013
Posts: 125
Likes: 0
From: exeter
Default

Pm sent
Reply
Old Dec 17, 2015 | 10:26 PM
  #4  
1509joe's Avatar
1509joe
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Jan 2009
Posts: 3,487
Likes: 316
From: Not sure
Default

PM sent
Reply
Old Dec 17, 2015 | 10:39 PM
  #5  
imprezagaz's Avatar
imprezagaz
Scooby Regular
iTrader: (2)
 
Joined: Feb 2008
Posts: 1,148
Likes: 7
From: Grimsby
Default

Have you any graphs please?
Reply
Old Dec 18, 2015 | 10:51 AM
  #6  
Kedlestone's Avatar
Kedlestone
Scooby Regular
iTrader: (9)
 
Joined: Jan 2010
Posts: 2,195
Likes: 0
From: Back in a Widetrack :)
Default

Interested in the RCM if not already gone?? Also possibly the intake pipe.

Last edited by Kedlestone; Dec 18, 2015 at 10:53 AM.
Reply
Old Dec 18, 2015 | 12:36 PM
  #7  
jrrs1's Avatar
jrrs1
Scooby Regular
 
Joined: Jul 2002
Posts: 300
Likes: 0
From: Milton Keynes..Moooo
Default

pm sent
Reply
Old Dec 18, 2015 | 01:23 PM
  #8  
Steve001's Avatar
Steve001
Scooby Regular
iTrader: (7)
 
Joined: Jan 2001
Posts: 3,695
Likes: 1
From: Chester (Tumbleweed City!)
Default

Interested in the turbo intake hose, are they as good as samco?

Cheers

Just did a search I'll have it
I assume it has all the standard take offs

Thanks

Paypal?

Last edited by Steve001; Dec 18, 2015 at 01:38 PM.
Reply
Old Dec 19, 2015 | 12:04 AM
  #9  
Dubzy's Avatar
Dubzy
Thread Starter
Scooby Regular
iTrader: (4)
 
Joined: May 2009
Posts: 979
Likes: 3
From: In the middle
Default

Originally Posted by imprezagaz
Have you any graphs please?
Can dig you some out if your interested but turbo is provisionally sold now.
Originally Posted by Kedlestone
Interested in the RCM if not already gone?? Also possibly the intake pipe.
Rcm Kit sold now im afraid
Originally Posted by Steve001
Interested in the turbo intake hose, are they as good as samco?

Cheers

Just did a search I'll have it
I assume it has all the standard take offs

Thanks

Paypal?
It wont be taken off the car until january mate but a small deposit will hold it if you want it and yes has all take offs

All pms replied
Reply
Old Dec 19, 2015 | 01:05 AM
  #10  
techdw's Avatar
techdw
Scooby Regular
iTrader: (2)
 
Joined: Oct 2012
Posts: 676
Likes: 0
From: UK
Default

SFS Silicon Intake Pipe, newage fitment (red) quality part in good used condition...£70 (£240 new from scoobyworld)

Is this available mate?
Reply
Old Dec 19, 2015 | 02:15 AM
  #11  
Steve001's Avatar
Steve001
Scooby Regular
iTrader: (7)
 
Joined: Jan 2001
Posts: 3,695
Likes: 1
From: Chester (Tumbleweed City!)
Default

January is not a problem re intake hose

PM me your PayPal details and I'll send across deposit or payment in full if that suits

Cheers PM sent too

Last edited by Steve001; Dec 19, 2015 at 02:25 AM.
Reply
Old Dec 19, 2015 | 07:35 PM
  #12  
Russell Hector's Avatar
Russell Hector
Scooby Regular
 
Joined: Jun 2012
Posts: 112
Likes: 0
Default

Dam really wanted the turbo and intake hose. Too slow cash waiting for both as well
Reply
Old Dec 22, 2015 | 12:11 AM
  #13  
Steve001's Avatar
Steve001
Scooby Regular
iTrader: (7)
 
Joined: Jan 2001
Posts: 3,695
Likes: 1
From: Chester (Tumbleweed City!)
Default

Deposit for intake hose sent
Reply
Old Dec 22, 2015 | 09:41 PM
  #14  
horsham rc's Avatar
horsham rc
Scooby Regular
iTrader: (1)
 
Joined: Dec 2011
Posts: 71
Likes: 1
From: west sussex
Default Injectors

possibly after the injectors just need to ask my engine builder if there suitable for my setup. Will let you no ASAP
Reply
Old Dec 22, 2015 | 10:52 PM
  #15  
Dubzy's Avatar
Dubzy
Thread Starter
Scooby Regular
iTrader: (4)
 
Joined: May 2009
Posts: 979
Likes: 3
From: In the middle
Default

Originally Posted by Steve001
Deposit for intake hose sent
Thanks mate, deposit received and list updated.
Reply
Old Dec 22, 2015 | 10:53 PM
  #16  
Dubzy's Avatar
Dubzy
Thread Starter
Scooby Regular
iTrader: (4)
 
Joined: May 2009
Posts: 979
Likes: 3
From: In the middle
Default

Originally Posted by horsham rc
possibly after the injectors just need to ask my engine builder if there suitable for my setup. Will let you no ASAP
They are still available, had interest but no deposit taken yet. They are good for up to 500 bhp
Reply
Old Dec 23, 2015 | 09:15 AM
  #17  
Benji554's Avatar
Benji554
Scooby Regular
iTrader: (18)
 
Joined: Mar 2008
Posts: 999
Likes: 0
Default

Will the Harvey smith uppipe fit a 2009 sti hatch? And is it wrapped? Thanks
Reply
Old Dec 23, 2015 | 09:22 AM
  #18  
banny sti's Avatar
banny sti
Scooby Senior
20 Year Member
Liked
iTrader: (68)
 
Joined: Oct 2004
Posts: 16,600
Likes: 24
From: Type R
Default

Wont fit the standard manifold as it is 3 bolt
Reply
Old Dec 23, 2015 | 04:04 PM
  #19  
Benji554's Avatar
Benji554
Scooby Regular
iTrader: (18)
 
Joined: Mar 2008
Posts: 999
Likes: 0
Default

Originally Posted by banny sti
Wont fit the standard manifold as it is 3 bolt
Ok, thanks
Reply
Old Dec 26, 2015 | 11:07 AM
  #20  
fayers93's Avatar
fayers93
Scooby Newbie
 
Joined: Feb 2015
Posts: 13
Likes: 0
From: Richmond
Default

Originally Posted by Dubzy
All listed parts are still on the car and will be removed early in the new year. The engine / turbo can be seen and heard running prior to removal for peace of mind. All items are in perfect working order and are only being removed due to a new 2.35 motor going in and im also converting to a rotated setup.

MD321T Billet Turbo with a Zircotec ceramic coated exhaust housing.
I purchased this turbo in August last year from a respected member of the Subaru community. He purchased the turbo new from Mark at Lateral Performance at the cost of £1750 and only used the turbo for 1K miles, most of which were to run in a new engine before deciding to go for a larger turbo setup.
I have covered another 6k miles since i purchased it so its only covered 7k miles from new and as such is still in perfect working order. On my current 2.0 setup it makes 446bhp on v-power at 1.7bar. I have the original build sheet and receipt from when i purchased it.... £900 (Provisionally Sold)

Harvey Smith (Trick) 3 bolt up pipe, covered less than 5k miles ...£80 ( £165 new from ASP)

Sard 650cc Fuel Injectors, newage fitment, perfect working order.... £150

SFS Silicon Intake Pipe, newage fitment (red) quality part in good used condition...£70 (£240 new from scoobyworld) Sold

RCM Induction Kit. Newage fitment, covered less than 5k... £90 (£210 new) Sold

2004 Sti Long Motor. Covered 86k, full service history, 100% reliable and well looked after engine. Starts first time every time with, no nasty knocks or rattles, no oil or coolant usage. This was a stock motor until 80k when i purchased the car. Before i had the car remapped to suit the above turbo i had it checked over by Mark at TDR (Thwaites Developments Racing), the engine was and still is performing perfectly, runs very quiet and makes the power its expected to make. Long engine only so no ancillaries etc, the heads and block will be left assembled so a nice easy straight drop in for somebody on a budget.
Can be seen and heard running.. £800

Collection preferred from Redditch or Warwick, postage and paypal fees to be added.

Im also looking for a rotated exhaust setup and a set of large (1000cc+) top feed injectors that i would take into a deal

.

What's the spec of the long engine ?
Reply
Old Dec 26, 2015 | 10:32 PM
  #21  
Dubzy's Avatar
Dubzy
Thread Starter
Scooby Regular
iTrader: (4)
 
Joined: May 2009
Posts: 979
Likes: 3
From: In the middle
Default

Originally Posted by fayers93
What's the spec of the long engine ?
2004 Blobeye Sti Engine (ej207), 86k miles, full service history. Runs very quiet with no oil or water usage and been 100% reliable. Engine is to be removed from the car on the 12th of Janury
Reply
Old Dec 26, 2015 | 10:36 PM
  #22  
band_wagon's Avatar
band_wagon
Scooby Regular
iTrader: (11)
 
Joined: Jul 2009
Posts: 1,129
Likes: 0
Default

Turbo gone ? As I'm local to mark at td racing so can collect asap if it has not cheers chris
Reply
Old Dec 27, 2015 | 11:18 PM
  #23  
Dubzy's Avatar
Dubzy
Thread Starter
Scooby Regular
iTrader: (4)
 
Joined: May 2009
Posts: 979
Likes: 3
From: In the middle
Default

Originally Posted by band_wagon
Turbo gone ? As I'm local to mark at td racing so can collect asap if it has not cheers chris
Sorry mate turbo is now sold.
Reply
Old Jan 4, 2016 | 05:48 PM
  #24  
Dubzy's Avatar
Dubzy
Thread Starter
Scooby Regular
iTrader: (4)
 
Joined: May 2009
Posts: 979
Likes: 3
From: In the middle
Default

List updated, just the injectors still for sale
Reply
Old Jan 5, 2016 | 12:52 PM
  #25  
Byers's Avatar
Byers
Scooby Regular
iTrader: (6)
 
Joined: Sep 2012
Posts: 251
Likes: 0
From: Hartlepool
Default

Originally Posted by Dubzy
List updated, just the injectors still for sale
Can you drop me a text please 07428126167
Reply
Old Jan 5, 2016 | 02:52 PM
  #26  
Byers's Avatar
Byers
Scooby Regular
iTrader: (6)
 
Joined: Sep 2012
Posts: 251
Likes: 0
From: Hartlepool
Default

Originally Posted by Byers
Can you drop me a text please 07428126167

Pm also sent
Reply
Old Feb 9, 2016 | 10:36 PM
  #27  
hitman_047's Avatar
hitman_047
Scooby Regular
 
Joined: Apr 2015
Posts: 33
Likes: 0
From: Portugal
Default

Injectors are side feed?? Will go to my 99??
Reply
Old Feb 9, 2016 | 11:13 PM
  #28  
GONZO01's Avatar
GONZO01
Scooby Regular
15 Year Member
Liked
iTrader: (6)
 
Joined: Feb 2007
Posts: 1,509
Likes: 1
From: South Wales,Swansea.
Default

Originally Posted by hitman_047
Injectors are side feed?? Will go to my 99??
Pretty sure they are top feed on the newage not side feed.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
scottydouk
Subaru Parts
4
Nov 22, 2015 06:31 PM
Mattybr5@MB Developments
Car Parts For Sale
1
Nov 18, 2015 08:03 AM
Mattybr5@MB Developments
Car Parts For Sale
1
Nov 18, 2015 08:02 AM




All times are GMT +1. The time now is 11:51 AM.