Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Rough idle, Hatch specC

Thread Tools
 
Search this Thread
 
Old Jul 20, 2018 | 05:58 PM
  #1  
hedgecutter's Avatar
hedgecutter
Thread Starter
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Sep 2010
Posts: 3,882
Likes: 704
From: far, far west
Default Rough idle, Hatch specC

My hatch has just started missing a beat whilst idling, but it does`nt register on the rev counter. However, the boost gauge does flicker each time. The plugs have done less than 5000 miles. It drives well. Could it be a vacuum leak? The intercooler to throttle hose looks a bit perished, so others could be poor as well.
Thanks
Reply
Old Jul 20, 2018 | 06:50 PM
  #2  
bustaMOVEs's Avatar
bustaMOVEs
Scooby Regular
iTrader: (31)
 
Joined: Jan 2012
Posts: 12,979
Likes: 30
From: The 2dr club
Default

If you vape or know anyone that does, blow some smoke into it to see if there are any leaks
Reply
Old Jul 20, 2018 | 07:26 PM
  #3  
MOTORS S GT's Avatar
MOTORS S GT
Scooby Regular
15 Year Member
iTrader: (2)
 
Joined: Jan 2009
Posts: 1,261
Likes: 38
From: Northampton
Default

Have a look what the avc's timing is doing, quad avc's does play up, especially if you have had a recent oil change.
Reply
Old Jul 20, 2018 | 08:23 PM
  #4  
RAGGY DOO's Avatar
RAGGY DOO
Scooby Regular
iTrader: (1)
 
Joined: Sep 2015
Posts: 3,000
Likes: 108
From: the rebel county
Default

How it go at engine tuner matey ?
Reply
Old Jul 20, 2018 | 09:12 PM
  #5  
hedgecutter's Avatar
hedgecutter
Thread Starter
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Sep 2010
Posts: 3,882
Likes: 704
From: far, far west
Default

I did change the oil about 600 miles ago; why does that occur?
Raggy, all good, but fuel reg wasnt plug and play, so didnt happen
Reply
Old Jul 21, 2018 | 08:40 AM
  #6  
jazzyjembreaze's Avatar
jazzyjembreaze
Scooby Regular
iTrader: (11)
 
Joined: Feb 2011
Posts: 2,750
Likes: 0
From: Newcastle upon tyne
Default

AVCS runs on oil pressure
Pretty sure it’s not that tho as your not throwing cel
Reply
Old Jul 21, 2018 | 08:48 AM
  #7  
jazzyjembreaze's Avatar
jazzyjembreaze
Scooby Regular
iTrader: (11)
 
Joined: Feb 2011
Posts: 2,750
Likes: 0
From: Newcastle upon tyne
Default

Edit , There were problems with the banjo screens causing problems after oil changes esp on low rev & idle , sure motors could give you a better description of this scenario
Regards
Reply

Trending Topics

Old Jul 21, 2018 | 09:37 AM
  #8  
hedgecutter's Avatar
hedgecutter
Thread Starter
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Sep 2010
Posts: 3,882
Likes: 704
From: far, far west
Default

The boost gauge flickers up and down in time with it at idle
Reply
Old Jul 21, 2018 | 05:44 PM
  #9  
hedgecutter's Avatar
hedgecutter
Thread Starter
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Sep 2010
Posts: 3,882
Likes: 704
From: far, far west
Default

So one screen looks easy, and the other could have been done when the cambelt was done the other day. Curse you Hindsight! Is there also a screen in the oil feed to the turbo, like the Legacy, and are they replaced or left out?
Reply
Old Jul 21, 2018 | 05:47 PM
  #10  
hedgecutter's Avatar
hedgecutter
Thread Starter
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Sep 2010
Posts: 3,882
Likes: 704
From: far, far west
Default

Bit of Collinite
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
eggy790
General Technical
20
Mar 17, 2010 06:56 AM
mikeswrt
Member's Gallery
44
Feb 25, 2004 06:06 PM
mikeswrt
ScoobyNet General
35
Feb 1, 2004 05:37 PM
mikeswrt
Member's Gallery
15
Jan 20, 2004 09:26 PM
mikeswrt
Member's Gallery
25
Dec 22, 2003 11:07 AM




All times are GMT +1. The time now is 09:12 AM.