Rods and Pistons from JUN 2.2 stroker kit
#1
Scooby Newbie
Thread Starter
Join Date: Nov 2011
Location: Greece
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Rods and Pistons from JUN 2.2 stroker kit
Hello everyone.
For sale 4 x JUN connecting rods with 4 x Cosworth pistons.
These parts are from the JUN 2.2 stroker kit. The rods are for 79mm crank shaft and the pistons have 92.5 bore.
Rods length is 1mm shorter(IIRC) than standard and the compression height of the pistons is 32 mm. Piston springs are new and these parts(rods and pistons) are slightly used.The 4 rods and 1 of the pistons are located at Gt Motorsport(Graham Sweet) and the 3 other pistons are with me as we didn't have in mind to change the rods so I sent only 1 piston with the other parts so Graham could take measurements for the C/R.
During the week I'll post pics from the 4 rods together(the pic shows the one rod).
The rods are made from SCM440 structure steel and the hardness is 38 HRC(IIRC).
Price for these parts is 800 GBPs.
Thanks for looking !!!
For sale 4 x JUN connecting rods with 4 x Cosworth pistons.
These parts are from the JUN 2.2 stroker kit. The rods are for 79mm crank shaft and the pistons have 92.5 bore.
Rods length is 1mm shorter(IIRC) than standard and the compression height of the pistons is 32 mm. Piston springs are new and these parts(rods and pistons) are slightly used.The 4 rods and 1 of the pistons are located at Gt Motorsport(Graham Sweet) and the 3 other pistons are with me as we didn't have in mind to change the rods so I sent only 1 piston with the other parts so Graham could take measurements for the C/R.
During the week I'll post pics from the 4 rods together(the pic shows the one rod).
The rods are made from SCM440 structure steel and the hardness is 38 HRC(IIRC).
Price for these parts is 800 GBPs.
Thanks for looking !!!
Last edited by stihlmaster660; 06 February 2017 at 05:21 PM.