Misfire. Wiring for Clifford Blackjax 5
11 November 2013, 10:49 AM
#1
Misfire. Wiring for Clifford Blackjax 5
I have a misfire and am wondering if it is due to this wiring patch to the blackjax.
2009 Hatch impreza STi.
Got this anti hijack unit fitted by dealer.
2 wires taken off plug 3 coil pack loom.
GREY wire ( middle ) goes to a black wire ...
and
Yellow ( left, by release clip ) goes to a brown wire on blackjax.
One ( brown ) wire goes to the alarm sounder unit, the black one stops dead .. is not used.
(No idea what goes to the alarm module or from where!)
Question is - should the black wire ( from the coil pack middle grey wire ) go anywhere?
Is it interfering in normal spark etc. if a wire is missing a connection.
Continuity of wire to coil seems ok, and to the Clifford wires too.
Any ideas?
Cheers
2009 Hatch impreza STi.
Got this anti hijack unit fitted by dealer.
2 wires taken off plug 3 coil pack loom.
GREY wire ( middle ) goes to a black wire ...
and
Yellow ( left, by release clip ) goes to a brown wire on blackjax.
One ( brown ) wire goes to the alarm sounder unit, the black one stops dead .. is not used.
(No idea what goes to the alarm module or from where!)
Question is - should the black wire ( from the coil pack middle grey wire ) go anywhere?
Is it interfering in normal spark etc. if a wire is missing a connection.
Continuity of wire to coil seems ok, and to the Clifford wires too.
Any ideas?
Cheers
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM