Modifications

iTrader: (6)

Hi all

sorry but i posted this in the wrong thread to start with so here goes again

after having the car just over a week ( my 3rd bugeye ) i noticed that sometimes when setting the alarm the indicators would sat lit until i turn it off then back on again. also tonight after setting the alarm just the passenger side rear indicator sayed lit turned it off then back on again and it was fine.

Its not doing it all the time just every so often and its not causing any problems at all i just want to know if this can be a simple fix

It is a standard subaru alarm, any one got any ideas

MR_TOAD_INSTALLER

iTrader: (1)

Sticking relays in alarm box
simple fix find one that is sticking on cut wire and use other indicator whire split with diodes to flash both

Ian

Modifications

iTrader: (6)

hi thanks for the reply, can you tell me were the alarm box is located please

nick172sport

iTrader: (6)

pull the wipers off pull the black cover off near windscreen box is located under panel 2 bolts and off

Modifications

iTrader: (6)

do i need to undo the nuts on the wipers or just pull them off lol

nice one m8 cheers for the info i will get this looked at this weekend. will it set alarm off when the module is unplugged or will it be ok to disconnect and reconnect without any problems m8.

cheers

MR_TOAD_INSTALLER

iTrader: (1)

You wont find it there
It will be under dash listen for clicking when arming and disarming

only siren under bonnet

Ian