Hi all got my clifford 600 fitted today and have read the instruction manual.
what it does not tell me is how to turn up the duel zone proximity sensor can any one pease tell me how to do this please

also where can i get an OMNI sensor from?

 

BTTT

 

Steve, i cant remember, but ring the installers and get them back to show you. You will probably need the software and link for it?

 

Thanks Steven, it took the guy 7 and a half hour's to fit ,
he did use his lap top to set everything up!
i know it can be done without a lap top you can use you valet switch and master remote but i dont know the code?
i did not want to ring the guy yet as he only fitted it yesterday, i dont want him to think im a pain in the neck calling him evey day or so..

 

ring him, you paid your money. when you say the code do you mean the code to access the adjustment? best way just ring him

 

If you do ring him he'll probably tell you to wait a few days for it to 'bed in' anyway.

Are you sure about being able to alter it from the remote / plain view switch? I was under the impression (Could well be wrong ) that the prox was set up with an analogue dial on the control unit.

Like I said, could be wrong...

 

I phoned him yesterday he said to give it at least two day's to settle down and if i want it turning up to ring him and he will talk me through it, it's done by remote once you are in program mode one button turn's it up and one button turns it down , it's only on the eary models that you turn it up with a little **** on the unit its self.....

also doe's anyone use the G5 master remote?

 

Is that the flimsy feeling thing with the big button, three small buttons and the shift button?

if it is then, NO. Too complimacated for a thick northener

 

My remote has 5 buttons on the face it has lock/unlock,*,**,boot open, and clifford button! the clifford button is below the other 4...

 

Try This

Using the master remote:

press the level shift button on the side of the remote 3 times

then press button 4 once

siren will chirp once
led will come on

then to adjust the internal zone press button 4 to decrease
button 2 to increase

to end internal adjustment press button 3 and the siren will chirp

then to adjust the external zone press button 4 to decrease
button 2 to increase

when you have finished adjusting: press button 1, you will get 2 chirps
press button 1 again you will get 3 chirps

thats it

 

Cheer's will give it a go is this how you do your's Keefy?
have you got a 600 clifford?

 

We are an approved Clifford/Toad/RAC Trackstar Dealer m8

 

Cheer's m8 will give it a go!
if i have any other questions i know who to ask!