BigRed

Can anyone tell me if the scooby's (MY00)remote central locking is negative or positive triggering, i have an old pirahna alarm that can trigger the CL but not sure of the polarity. There is a small box under the dash near the steering wheel , i think this is the control box to the CL, am i right? if so where do i connect to it?

BigRed

Come on , someone MUST know, i'm sick of having to use 2 remotes, one for the alarm one for remote C/L.

SCOOBY TOWERS

iTrader: (7)

Not sure if this will help,(I'm no expert) but I thought the MY00 central locking was not remote.
As far as I'm aware it only become remote via the Sigma alarm that Subaru fit as standard to the UK cars.
If you have a Import (JDM or Euro) then its possible that you have two alarms fitted hence the two remotes.
Like I say I'm no expert, and maybe a better description of your remotes etc will get you a more in depth reply.
Chris

BigRed

Thanks scooby towers,

I fitted the alarm myself (Piranha alarm) seeing as this alarm can control the C/L, and my C/L is remote ,small subaru keyfob remote type infra-red, i was intersted in using the alarm to lock/unlock the car and put the subaru one away, so only use one remote.

SCOOBY TOWERS

iTrader: (7)

Should be possible.
You just need to wire the drivers door CL motor into your Piranha alarm for it to work.
The wires for the subaru door opening device will probably just need rerouting to the Piranha system.
Hope this makes sense - like I said b4 I'm no expert
Chris

BigRed

Thanks Scooby Towers , i'm going to have a crack at this job in the near future , when i can spare the time that is!!!!!!!