Aberdeen Knocklink owners
#1
Scooby Regular
Thread Starter
Join Date: Dec 1999
Location: Aberdeen
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Anyone in the Aberdeen area that has a Knocklink I could 'borrow' for a few moments ?
I fitted one myself last night and can't seem to get any lights to show on it. I just want to swap in a known good unit, before I send this one back.
I'm fairly sure it's the unit as the quality of the soldering leaves a lot to be desired, when it arrived all the LED's were dry jointed along with the control pot.
I fitted one myself last night and can't seem to get any lights to show on it. I just want to swap in a known good unit, before I send this one back.
I'm fairly sure it's the unit as the quality of the soldering leaves a lot to be desired, when it arrived all the LED's were dry jointed along with the control pot.
#4
Scooby Regular
Join Date: Sep 2001
Location: Aberdeen
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Ken,
Ive also got one fitted to the car although the control unit isnt stuck down yet and is just sitting in front of the gearstick if this helps you anyway. I'll be at Knockhill tomorrow as well.
Can also check it on the bench at work to see if will power up if you want.
Duncan...
Ive also got one fitted to the car although the control unit isnt stuck down yet and is just sitting in front of the gearstick if this helps you anyway. I'll be at Knockhill tomorrow as well.
Can also check it on the bench at work to see if will power up if you want.
Duncan...
#6
Scooby Regular
Thread Starter
Join Date: Dec 1999
Location: Aberdeen
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Duncan, can you give me a call on 07********, and I'll see if I can meet up with you, sometime Friday.
[Edited by Ken Ross - 5/23/2003 10:04:18 PM]
[Edited by Ken Ross - 5/23/2003 10:04:18 PM]
Trending Topics
#9
Scooby Regular
I got back late late last night, didn't have enough time to get sorted for Knockhill Hope everyone had fun!
Ken, I made a seperate enclosure for the LEDS however I'm sure we can connect yours up to check.
Ken, I made a seperate enclosure for the LEDS however I'm sure we can connect yours up to check.
#10
Scooby Regular
Thread Starter
Join Date: Dec 1999
Location: Aberdeen
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Got it up and going, now. Found that the Adjustment pot only had 2 legs !
I have copied your design Rob and put a box with the 5 LEDs on the dash.
Gave it a quick thrash and so far have only managed to light 2 LED's maybe I need to put unleaded in and try again
I have copied your design Rob and put a box with the 5 LEDs on the dash.
Gave it a quick thrash and so far have only managed to light 2 LED's maybe I need to put unleaded in and try again
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM