injector fitting

Reply Subscribe

Thread Tools

Search this Thread

Dec 4, 2013 | 03:20 PM

Philturbo1

Thread Starter

Scooby Regular

Joined: Jul 2011

Posts: 194

Likes: 1

From: Barnsley

injector fitting

Hi guys im fitting some 440 injectors into my 97 turbo 2000. I've got the old ones out but carnt get the 440s back in. How do they go back in? Any help would be great guys. Phil

Dec 4, 2013 | 03:26 PM

just me

Scooby Regular

iTrader: (3)

Joined: Sep 2013

Posts: 880

Likes: 0

From: glasgow

lots of vaseline

Dec 4, 2013 | 03:53 PM

Philturbo1

Thread Starter

Scooby Regular

Joined: Jul 2011

Posts: 194

Likes: 1

From: Barnsley

Put Vaseline on both seals and just push or do they pop into place cos mine keep pushing back out.

Dec 4, 2013 | 04:51 PM

MattyB1983

Scooby Regular

iTrader: (51)

Joined: Jul 2010

Posts: 12,716

Likes: 46

From: Around

What year car did the 440's come from ?

Dec 4, 2013 | 04:53 PM

MattyB1983

Scooby Regular

iTrader: (51)

Joined: Jul 2010

Posts: 12,716

Likes: 46

From: Around

If they are from a later car (phase 2) then you'll need this...

http://www.carldavey.co.uk/product.php?id=2

Your car is a phase 1.5.

Dec 4, 2013 | 05:38 PM

Philturbo1

Thread Starter

Scooby Regular

Joined: Jul 2011

Posts: 194

Likes: 1

From: Barnsley

I was told they would fit strait in place of myold grey ones and they look identical to mine just a different colour. Do the rails need to come off too.

Dec 4, 2013 | 08:21 PM

Philturbo1

Thread Starter

Scooby Regular

Joined: Jul 2011

Posts: 194

Likes: 1

From: Barnsley

I've had another look at them and they are exactly the same baring thr colour. Do in need to put the small o ring off the bottom of the injector into the fuel rail first then put the injector in.