Big thanks to Andrew Carr.
#1
Scooby Newbie
Thread Starter
Join Date: Jul 2012
Location: Dewsbury
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Big thanks to Andrew Carr.
Some of u may know that I fitted a Scooby engine and running gear in to my Corsa.
Well now it's got a close deck block'sti 8 cranks and rods forge pistons acl bearers and arps thought out v4 heads latarel prefomance injectors equal length mani and a gt30/76 turbo and 6speed box Alcatec ecu
Andrew carr mapped it for me last nite and we got 433bhp and 425torque.
Well now it's got a close deck block'sti 8 cranks and rods forge pistons acl bearers and arps thought out v4 heads latarel prefomance injectors equal length mani and a gt30/76 turbo and 6speed box Alcatec ecu
Andrew carr mapped it for me last nite and we got 433bhp and 425torque.
Trending Topics
#8
Scooby Senior
iTrader: (34)
Some of u may know that I fitted a Scooby engine and running gear in to my Corsa.
Well now it's got a close deck block'sti 8 cranks and rods forge pistons acl bearers and arps thought out v4 heads latarel prefomance injectors equal length mani and a gt30/76 turbo and 6speed box Alcatec ecu
Andrew carr mapped it for me last nite and we got 433bhp and 425torque.
Well now it's got a close deck block'sti 8 cranks and rods forge pistons acl bearers and arps thought out v4 heads latarel prefomance injectors equal length mani and a gt30/76 turbo and 6speed box Alcatec ecu
Andrew carr mapped it for me last nite and we got 433bhp and 425torque.
Ps what transmission are you running?
#9
Scooby Newbie
Thread Starter
Join Date: Jul 2012
Location: Dewsbury
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
We are running with meth but the exhaust housing is too small I think to give wot we want at the top end. I bought a md321t second hand and it broke so I got a 30/76 and fitted in it the md321t housing.
The transmission is a jdm 6speed box and ra rear diff with r160 shafts
The transmission is a jdm 6speed box and ra rear diff with r160 shafts
Last edited by specky tigra; 17 May 2013 at 04:04 PM.
#10
Scooby Regular
iTrader: (1)
Join Date: May 2009
Location: nowhere fancy
Posts: 1,758
Likes: 0
Received 0 Likes
on
0 Posts
I have seen this in the flesh and you would not believe the quality of the finish!
The whole car looks factory finished and for Andy who is vauxhall through and through to achieve this deserves massive respect! I have a promise of a ride out in this and can't wait
The whole car looks factory finished and for Andy who is vauxhall through and through to achieve this deserves massive respect! I have a promise of a ride out in this and can't wait
#11
Scooby Newbie
Thread Starter
Join Date: Jul 2012
Location: Dewsbury
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
#12
Scooby Senior
iTrader: (34)
We are running with meth but the exhaust housing is too small I think to give wot we want at the top end. I bought a md321t second hand and it broke so I got a 30/76 and fitted in it the md321t housing.
The transmission is a jdm 6speed box and ra rear diff with r160 shafts
The transmission is a jdm 6speed box and ra rear diff with r160 shafts
Thread
Thread Starter
Forum
Replies
Last Post
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM