my car was low on compression turns out its the heads so sent them off but there not gonna be any good so im looking for some ported v2 heads to go on my 2.35 need to fit 14mm studs as well

 

Sorry hear that there,we are went too with 14mm headstuds and about the heads not sure,do you consider run AVCS heads 2.5L or 2.0L JDM heads ?

On yours ECU you can run AVCS/VVT and this can help in spool up


Jura

 

tuner said dont fit mine

 

Not good mate

 

Can be made to fit but will need some messing with the wiring as you need a later inlet manifold, Simon should be able to give you a proper answer

 

no mate more money lol think iv found some posted and polished ill have them rebuilt and mad to fit 14mm . and new injectors

 

Its a fair bit of work to change manifold to fit then or change to newer manifold, wiring and ecu needs the avcs adding and a newage crank wheel. All possible deffo and avcs will spool nicely.

Can you not get standard v1/2 head casings for peanuts and fit your cams and solid lifters and new valves? From memory they were 272 or similar cams.

Simon