I was driving down the road the other day when I heard a noise as if a bolt had fallen off, then I noticed my intercooler scoop was wobbling. 2003 Blobeye STi.

I too the undertray off and noticed that the scoop was only held on by 4 or 5 plastic pegs, the others were missing. It looks as if it should have 10.

I went to my dealer, but when he put my chassis number into the computer, the drawing wasn't really the same, and it turns out my car is a Euro Import. However, surely this is a pretty standard part. It's like a T piece of plastic which is held in a captive slot in the scoop and a spring loaded plastic peg pushed through a hole in the bonnet.

Here's the same drawing my dealer had...

http://opposedforces.com/parts/impre...llustration_2/

He ordered up part 20 but it's not right. It's like a plastic bolt.

Anyone advise on this, even help with a part number or have any lying about?

 

Edited, didn't read it properly!

Easiest solution would be to get some small bolts and depending on the head size could slide back in there, Take one out and have a visit to B&Q etc.

 

Try scooby spares or Scooby clinic. Both have plenty of parts from all models.

 

Cheers guys...