Dial sweep on start up?
19 November 2012, 09:03 PM
#1
Dial sweep on start up?
I'm after getting the dial sweep on start up installed on my car (06 Hawk Spec C). I was meant to be getting it done at Litchfields last week but they don't do it any more as the company they used to send it out to get done at went bust.
Does anyone know any other company that does it?
Does anyone know any other company that does it?
Trending Topics
19 November 2012, 10:51 PM
#8
Scooby Regular
Join Date: Dec 2010
Posts: 3,241
Likes: 0
Received 0 Likes
on
0 Posts
19 November 2012, 11:38 PM
#11
19 November 2012, 11:40 PM
#12
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
Try this 
post 50 on the 2nd page, it was standard on all JDM's from 2003 onwards including the Spec C (my MY03 17 inch use to do it and my MY03 limited does it).
https://www.scoobynet.com/scoobynet-...snt-sweep.html
Tony
post 50 on the 2nd page, it was standard on all JDM's from 2003 onwards including the Spec C (my MY03 17 inch use to do it and my MY03 limited does it).https://www.scoobynet.com/scoobynet-...snt-sweep.html
Tony
Last edited by TonyBurns; 19 November 2012 at 11:44 PM.
20 November 2012, 12:36 AM
#15
Scooby Senior
iTrader: (15)
Join Date: Jul 2005
Location: Club Chairman - West Mids Imprezas
Posts: 8,889
Likes: 0
Received 0 Likes
on
0 Posts
Tony will this work on my spec c? It doesnt at the moment.....
That thread you pointed out states 'excluding sti spec c'
Yet in your above post you said it used to work on both your cars
Confused
That thread you pointed out states 'excluding sti spec c'
Yet in your above post you said it used to work on both your cars
Confused
Last edited by B4D HK; 20 November 2012 at 12:40 AM.
20 November 2012, 12:41 AM
#16
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
It use to H (standard JDM map, no tweaks or anything), yes it should work if you follow that setup.
It was one of the first things i noticed when I had that Spec C
Tony
It was one of the first things i noticed when I had that Spec C
Tony
20 November 2012, 12:42 AM
#17
Scooby Senior
iTrader: (15)
Join Date: Jul 2005
Location: Club Chairman - West Mids Imprezas
Posts: 8,889
Likes: 0
Received 0 Likes
on
0 Posts
ahhh ok cheers bud i will have a play tomorrow
I know on the uk cars the beeps goes if the battery goes flat, maybe it just needs re-doing
However i just checked my clocks and I can confirm that it only has one dial/**** which Is the trip computer one on the right. There is no other dial/****/rev to the left of the cluster
I know on the uk cars the beeps goes if the battery goes flat, maybe it just needs re-doing
However i just checked my clocks and I can confirm that it only has one dial/**** which Is the trip computer one on the right. There is no other dial/****/rev to the left of the cluster
Last edited by B4D HK; 20 November 2012 at 12:52 AM.
20 November 2012, 12:53 AM
#19
I had the same problem on my Blob Spec C. Correct clocks but didn't sweep. What you need is a code entered onto the chip on the back of the clocks.
There is a chap near me who has the computer software to do it but would need your clocks and a set that does the sweep so he can copy the code that activates the sweep and enter it on yours.
There is a chap near me who has the computer software to do it but would need your clocks and a set that does the sweep so he can copy the code that activates the sweep and enter it on yours.
20 November 2012, 12:54 AM
#21
Owner of SNet
iTrader: (7)
Join Date: Oct 2003
Location: Berkshire
Posts: 11,513
Likes: 0
Received 0 Likes
on
0 Posts
I had the same problem on my Blob Spec C. Correct clocks but didn't sweep. What you need is a code entered onto the chip on the back of the clocks.
There is a chap near me who has the computer software to do it but would need your clocks and a set that does the sweep so he can copy the code that activates the sweep and enter it on yours.
There is a chap near me who has the computer software to do it but would need your clocks and a set that does the sweep so he can copy the code that activates the sweep and enter it on yours.
TX.
20 November 2012, 12:56 AM
#23
Scooby Senior
iTrader: (15)
Join Date: Jul 2005
Location: Club Chairman - West Mids Imprezas
Posts: 8,889
Likes: 0
Received 0 Likes
on
0 Posts
I had the same problem on my Blob Spec C. Correct clocks but didn't sweep. What you need is a code entered onto the chip on the back of the clocks.
There is a chap near me who has the computer software to do it but would need your clocks and a set that does the sweep so he can copy the code that activates the sweep and enter it on yours.
There is a chap near me who has the computer software to do it but would need your clocks and a set that does the sweep so he can copy the code that activates the sweep and enter it on yours.
Last edited by B4D HK; 20 November 2012 at 01:02 AM.
20 November 2012, 01:04 AM
#27
Owner of SNet
iTrader: (7)
Join Date: Oct 2003
Location: Berkshire
Posts: 11,513
Likes: 0
Received 0 Likes
on
0 Posts
I call bullsh*t but here is the infamous post #50:
https://www.scoobynet.com/showpost.p...5&postcount=50
TX.
but here is the infamous post #50:https://www.scoobynet.com/showpost.p...5&postcount=50
TX.
20 November 2012, 01:06 AM
#28
Scooby Senior
iTrader: (15)
Join Date: Jul 2005
Location: Club Chairman - West Mids Imprezas
Posts: 8,889
Likes: 0
Received 0 Likes
on
0 Posts
Its 1am and we are sat here talking about this rofl, i was always under the impression spec c doesnt sweep, or have a temp sensor. Tony i wonder if litcho initially enabled it on mine and then after battery went flat/or over time/or after remap the function went away.
Looking at them instructions it seems to mention two dials/*****, rev and trip, where as i only have the one trip as per picture (standard spec c clocks)
Looking at them instructions it seems to mention two dials/*****, rev and trip, where as i only have the one trip as per picture (standard spec c clocks)
Last edited by B4D HK; 20 November 2012 at 01:11 AM.
20 November 2012, 01:37 AM
#29
"H" mine has the outside temp and rev/gear change limiter thing on it but mine is the spec c WR limited. What ever spec of spec c there is non of them came with the sweep working but after I spoke to a couple of people I was told the is a code that needs programed into the chip on the back of the clocks that stores you mileage, dccd etc and all you need to do is have someone enter the code. This is what I did and works a treat.
For the people who have Spec C's and have these clocks but they don't sweep all you need is a code to get them to sweep.
For the people who have Spec C's and have these clocks but they don't sweep all you need is a code to get them to sweep.
20 November 2012, 01:51 AM
#30
Scooby Senior
iTrader: (15)
Join Date: Jul 2005
Location: Club Chairman - West Mids Imprezas
Posts: 8,889
Likes: 0
Received 0 Likes
on
0 Posts
"H" mine has the outside temp and rev/gear change limiter thing on it but mine is the spec c WR limited. What ever spec of spec c there is non of them came with the sweep working but after I spoke to a couple of people I was told the is a code that needs programed into the chip on the back of the clocks that stores you mileage, dccd etc and all you need to do is have someone enter the code. This is what I did and works a treat.
For the people who have Spec C's and have these clocks but they don't sweep all you need is a code to get them to sweep.
For the people who have Spec C's and have these clocks but they don't sweep all you need is a code to get them to sweep.
Btw get some pics up on a sepperate thread, nice rare car you have there
Last edited by B4D HK; 20 November 2012 at 01:52 AM.