Stereo removal
#1
BANNED
Thread Starter
iTrader: (3)
Join Date: Oct 2010
Location: UP TO MY NUTS IN GUTS
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
Stereo removal
Incredibly my 97 WRX still has its original wireless fitted,I have a sexy sony jobbie that I can play my ipod thru but cant see how to remove the old unit (without a sledge hammer).Any advise appreciated thanks
My local garage recons I need to remove the centre console
My local garage recons I need to remove the centre console
#2
Scooby Regular
Join Date: Nov 2011
Location: Exiled to Finland
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
yep.. but dont be put off.. it is easy,
I just did my bug eye in April.
I found some very good guides via google..
-remove cup holder by removing the 2 screws
-pull centre console from the top, the plactic clips WILL pop open, you may want a plastic tool (bike tyre remover it what i used) to give some leverage..
once the console is off it becomes obvious.. a few screws holding in the cage n out she comes.
I took my time n with my 4 year old 'helping' we did it in a couple of hours
Vik
I just did my bug eye in April.
I found some very good guides via google..
-remove cup holder by removing the 2 screws
-pull centre console from the top, the plactic clips WILL pop open, you may want a plastic tool (bike tyre remover it what i used) to give some leverage..
once the console is off it becomes obvious.. a few screws holding in the cage n out she comes.
I took my time n with my 4 year old 'helping' we did it in a couple of hours
Vik
#3
Scooby Regular
Join Date: Nov 2011
Location: Exiled to Finland
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
this
http://forums.nasioc.com/forums/showthread.php?t=749402
will help you...
make sure you get the CORRECT adapter before you start work..
ebay has loads, its work contacting the audio shops to make sure they are selling you the right one.
Vik
http://forums.nasioc.com/forums/showthread.php?t=749402
will help you...
make sure you get the CORRECT adapter before you start work..
ebay has loads, its work contacting the audio shops to make sure they are selling you the right one.
Vik
#4
Scooby Regular
Join Date: Oct 2009
Location: Inverness
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
This is a classic though so I didn't remove the console in the two I've had.
Removed the thin plastic trim around the stereo to reveal the holes where the release tool fits, in the absence of the U shaped release tool I used 4 thin drill bits then it slides out. Its just a standard single Din stereo fitment
Removed the thin plastic trim around the stereo to reveal the holes where the release tool fits, in the absence of the U shaped release tool I used 4 thin drill bits then it slides out. Its just a standard single Din stereo fitment
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM