i have a simtek with 2 maps pump and also a 20% meth map

mj said not worth puting on the injection kit as i have a meth map of which is a good point
but is the water injection worth fitting if i just use 100% water

or convert it to mist the front mount when my cryo co2 kit is active ?

 

Have look on this

http://bbs.22b.com/cgi-bin/ultimateb...c;f=7;t=001922

I don't know,i want run too similar kit AEM water methanol kit and mine mapper/engine builder said its waste of money,problem with these kits is pump which can fail(on Nasioc is good thread about the failing Aquamist pumps and other makers).

Jura

 

Had aquamist water injection on my old mr2 and that car loved it kept it very healthy but mr2's did struggle with cooling a bit

 

I have the devils own pump did try a aquarist but very poor reliability bit unsure might turn it into a mist system on my fmic coupled with my liquid co2 kit

 

you can get the kits that shut down the boost if it detects a pressure problem, i would do it for convenience and safety if you are running a top mount, cools the inlet charge.

and how much meth is really in your car when you just add 20% at each fill up and what a ballache that must be