oldskool1977

hi just took a kkk k26 turbo off and put on a tdo5 witch was working fine on my mates car it doesnt seem to be holding bosst and im only reaching 6 psi any help would be appreciated might be a silly question but would i need the ecu off the car that the turbo came from as i only hace a u8 ecu thanks ant

addi monster

iTrader: (6)

yes you will need the ecu to match the turbo or a re map to run it,.

rudi93

iTrader: (22)

A u8 ecu is off a 93 import i think so should work with the td05. are you sure you plumbed all the pipework back properly.
would help if you said what year yours is?

addi monster

iTrader: (6)

whatever ecu he has was mapped to the kkthingy he took off so it wont run the td05, if he swaps the ecu he will also need to make sure the injectors ect are the same as the map on the ecu,.

oldskool1977

it is a l reg the car that the tdo5 came off of had a 7d ecu thanks

MattyB1983

iTrader: (51)

You can't just go swapping turbo's without having the car setup to accept it. Fueling could be all over the place.

oldskool1977

would it help if i had the ecu off the car the td05 came off cheers ant

addi monster

iTrader: (6)

your car needs to be the same spec as the car the td05 came off for the ecu to work or as already explained your fueling will be all over and that means kaboom in most cases,.

oldskool1977

how would i check that cheers ant

MattyB1983

iTrader: (51)

The car needs to go to a specialist mate, put on a dyno and checked over by someone in the know.

L.J.F

iTrader: (31)

You will blow the engine up if you dont get the car mapped for the new turbo mate.

Jolly Green Monster

iTrader: (4)

What ecu is in it and was it mapped to the other non standard one?

oldskool1977

my ecu thats in at the minit is a u8 and think it must have been maped to run the k26 turbo. i have got the ecu that was runing the td05. cheers.