apexi problems
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: county durham
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
apexi problems
looking for some advice on a problem im having with a apexi i have refitted back into my car a my98 uk terzo. removed the below parts and refitted standard parts as i was going to put car back to standard
had a change of heart enjoyed the better performance
refitted 550cc power enterprise injectors
refitted td05 turbo
refitted 3 port boost solanoid and plumbed the relevent piping in
changed ecu wiring to suit apexi power fc from 8s uk ecu
plug 137 pin17 to pin 7 fuel pump
plug 136 pin 8 to pin 10 exhange cam and crank
car wont start. i can hear the fuel pump prime as soon as i turn the key the engine turns over but doesnt start. theres no smell of fuel makes me think that the injectors arent flowing fuel.
i had to change the electrical connectors to fit the power enterprise injectors is it possible that i had managed to get the wires the wrong way round?
any help appreiciated
had a change of heart enjoyed the better performance
refitted 550cc power enterprise injectors
refitted td05 turbo
refitted 3 port boost solanoid and plumbed the relevent piping in
changed ecu wiring to suit apexi power fc from 8s uk ecu
plug 137 pin17 to pin 7 fuel pump
plug 136 pin 8 to pin 10 exhange cam and crank
car wont start. i can hear the fuel pump prime as soon as i turn the key the engine turns over but doesnt start. theres no smell of fuel makes me think that the injectors arent flowing fuel.
i had to change the electrical connectors to fit the power enterprise injectors is it possible that i had managed to get the wires the wrong way round?
any help appreiciated
Last edited by mr terzo; 11 December 2011 at 07:02 PM. Reason: .
Thread
Thread Starter
Forum
Replies
Last Post