Removing Engine Under-Tray for Bugeye
17 April 2011, 01:14 PM
#1
Scooby Regular
Thread Starter
Join Date: Nov 2004
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Removing Engine Under-Tray for Bugeye
The lower radiator hose has come off the radiator and im having trouble reaching in from the top.
Figured only way would be to remove the tray underneath. I havent yet trying jacking up the car yet.
Has anyone removed their tray and any tips when doing this such as best jacking point? I have read there are 4 bolts and clips but could not see these at first glance
any tips would be appreciated.
Figured only way would be to remove the tray underneath. I havent yet trying jacking up the car yet.
Has anyone removed their tray and any tips when doing this such as best jacking point? I have read there are 4 bolts and clips but could not see these at first glance
any tips would be appreciated.
17 April 2011, 05:40 PM
#2
Just need to get car up high and support on chassis or wheel ramps. It is just 4 bolts and about half a dozen clips and 2 u shaped clips at the back of it. Just make sure car is secure before you get under
18 April 2011, 11:53 AM
#3
Scooby Regular
Thread Starter
Join Date: Nov 2004
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
which is the best point to jack it up. I have read theres a point near the front-centre just behind the tray
Thread
Thread Starter
Forum
Replies
Last Post
JonMc
Subaru Parts
22
06 February 2016 09:50 PM