hi,

bit stuck can anyone point me in the right direction

locating fill and drain holes (can see one)

thanks mark


http://

 

Bottom one is your drain hole.

To fill the diff, you need to remove the diff oil Temp sensor adaptor and fill through that.

You're best off getting the squeezable bottles with the pull out straw type attachment usually 1litre size. You then fill the oil upto the hole and then replace the adaptor and sensor.

Hope that helps

Daz

 

bottom one is drain, remove connector from top one and that is fill.

 

thanks guys will do it now (got the oil with filling tube)

 

Done