front brake disc size
Hi All,
I have an 01 plate impreza WRX and i need an argument settled between my garage, kwikfit and where i purchased the car.
it's a very long story and i won't bore you but i really need to know what size the disc's should be on the front? and if there should be an overhang between the pad and the disc?
cheers
D
I have an 01 plate impreza WRX and i need an argument settled between my garage, kwikfit and where i purchased the car.
it's a very long story and i won't bore you but i really need to know what size the disc's should be on the front? and if there should be an overhang between the pad and the disc?
cheers
D
As above, give or take 1mm or so, The pad normally sits just inside the edge of the disc, Hence why most of the time when 4 pots are removed with the discs they have a lip as the pad does not catch the outer edge, Good luck .
Joined: Dec 2000
Posts: 8,021
Likes: 57
From: www.godspeedbrakes.co.uk
Yes 294mm , there should be about 1mm of disc overhanging the pads , could they have fitted the early 277mm discs which would leave the pads overhanging the discs 8.5mm
Cheers Ian
Cheers Ian
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
Jan 11, 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
55
Aug 5, 2018 07:02 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
Jul 17, 2016 10:43 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
Dec 14, 2015 08:16 AM







