Subaru Part Number - Hatchback STI
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Mar 2002
Posts: 12,566
Likes: 1
From: Never you mind
Guys
I need a part number - is there any way I can find this online.
Basically its a clip for the rear bumper of a 2010 hatchback STI.
Its a male/female type clip that pushes in through the bumper into the body of the car.
This clip is right on the lip of the bumper just behind the wheel.
Hope that makes sense.
Cheers
Shaun
I need a part number - is there any way I can find this online.
Basically its a clip for the rear bumper of a 2010 hatchback STI.
Its a male/female type clip that pushes in through the bumper into the body of the car.
This clip is right on the lip of the bumper just behind the wheel.
Hope that makes sense.
Cheers
Shaun
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Mar 2002
Posts: 12,566
Likes: 1
From: Never you mind
They are and they have
They rang me just now and said that the clip is in the post.
I'm just not confident that its the right thing based on what he said
He described the clip as tiny
They rang me just now and said that the clip is in the post.
I'm just not confident that its the right thing based on what he said
He described the clip as tiny
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Mar 2002
Posts: 12,566
Likes: 1
From: Never you mind
Sadly my suspicions were true
Wrong part received
They've sent me the clip from the top part of the bumper where it connects to the body.
I'll have another go at trying to describe the part required to the dealer.
Wrong part received

They've sent me the clip from the top part of the bumper where it connects to the body.
I'll have another go at trying to describe the part required to the dealer.
I'll get you the part number from work on monday or a clip either way lol
theres 3 different types
small clip with a pin in the middle you can push right through the head is tiny on it
bigger type clip with only two bits molded into it enable you to prise it out
and another bigger clip that has 4 bits molded into it to enable you pise it out
theres 3 different types
small clip with a pin in the middle you can push right through the head is tiny on it
bigger type clip with only two bits molded into it enable you to prise it out
and another bigger clip that has 4 bits molded into it to enable you pise it out
Last edited by rob84; May 8, 2010 at 05:48 PM.
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Mar 2002
Posts: 12,566
Likes: 1
From: Never you mind
Cheers Rob
Its the clip from figure J/K on these instructions
http://www.rallyarmor.com/store/sti_...structions.pdf
Its the clip from figure J/K on these instructions
http://www.rallyarmor.com/store/sti_...structions.pdf
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Danny0608
Subaru Parts
0
Sep 12, 2015 02:59 PM






