induction question
#1
induction question
Ok guys ive had lots of great advise from people on here and im after some more ! will fitting a decent induction kit upset the car or not ive been told as long as its not a cheap kit and the car doesnt get given the beans all the time things should b ok?
I kno alot of people on here dont like them but i like the sound and im not a fan of the pshhhh granny killer valve
I kno alot of people on here dont like them but i like the sound and im not a fan of the pshhhh granny killer valve
#2
Scooby Regular
Join Date: Feb 2007
Location: Huntingdon
Posts: 697
Likes: 0
Received 0 Likes
on
0 Posts
AFAIK, an induction kit will work on a new age, but will give no benefits (other than a bit of noise) and may lower your power due to upsetting the air/fuel mixture.
On a classic then it is likely that you will damage your MAF sensor pretty quickly, leading to a £££ bill.
On either car, not recommended, unless you are pushing out more than 350bhp when the std air box is too restrictive.
On a classic then it is likely that you will damage your MAF sensor pretty quickly, leading to a £££ bill.
On either car, not recommended, unless you are pushing out more than 350bhp when the std air box is too restrictive.
#4
Scooby Regular
iTrader: (4)
Join Date: May 2005
Location: midlands......
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
Strange you like the induction sound but dislike the vta...... plus the induction kit has no bearing on the dump valve,leave the airbox on and fit an uprated panel filter for best results
#5
Scooby Regular
iTrader: (8)
Join Date: Jan 2006
Location: MK
Posts: 4,931
Likes: 0
Received 0 Likes
on
0 Posts
what car, what power , etc
I am with you tho mate I am planning on getting an induction kit with a cold air feed but hopefully will be around the 350 mark but looking foreward to the sound
I am with you tho mate I am planning on getting an induction kit with a cold air feed but hopefully will be around the 350 mark but looking foreward to the sound
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM