justdragons

Has anyone every had a sticky clutch pedal,its sticking half way down. Keep having to put my foot underneath to bring it back up again,it makes a clicking noise when you put your full down on the clutch.
Ive sprayed WD40 and grease round the back of pedal,but still does it,so annoying!!!!

Can anyone help with this?

HELP,HELP,HELP,HELP,HELP,HELP,HELPHELP,HELP,HELP,H ELP,HELP,HELP

Matt241

Wouldnt be a Clutch Slave Cylinder???


Matt.

justdragons

Thanks for the reply matt,what is a clutch slave cylinder??

rigga

iTrader: (4)

Try looking to see if the clutch return spring is still fitted to the actuating arm sited under the intercooler.......

justdragons

If the return spring wasnt still attached wouldnt the clutch pedal be on the floor?

I will check this in the morning

justdragons

Anyone else got any idea's with this.

rigga

iTrader: (4)

I take it the spring is still fitted then?

justdragons

Couldnt find the spring you where talking about,can you post a picture of it for me so i can start the process of elimination?

Its weird when the pedal gets stuck half way down it dosnt loose power like the clutch is dipped,just carrys on motoring

V3 STI

Clutch slave cylinder mate , changed it on my type r last week as i had the same probs you described , there cheap and easy to fit too.

Rob .

justdragons

Thanks,where can i get one from?

Poor old scooby has a busy work load next week,tinted widows on tuesday,cat 1 alarm on wensday and of to subaru for full service and check out this problem with the clutch.
Im hoping that it is this clutch slave cylinder as its cheap.

Was your clutch doing the exact same thing?

M444GY

iTrader: (72)

slave cylinder dude

justdragons

Thanks,have you had to replace the slave cylinder before?

did you have the same symptoms?

Any idea on the price and where i can order one?

Thanks all

Mike

V3 STI

Yes mate after changing gear it would only come up half way , i had to put my foot under it to flick it up . think the slave cylinder was £40 odd quid but my dad is in the trade so might be a bit more not much tho .

Rob .

justdragons

Thanks alot mate,im booking it in for the slave cylinder tommorow.

Thanks again all who have helped me

BigBez

i have this exact same problem! just stops about 1cm from fully up

p12mem

HELLO ALL NEW TO THIS, NOT SURE IF ANYONE IS THERE?

justdragons

Its f**ken annoying aint it,my pedal only comes back to half way and allways after a good boost

p12mem

HELLO, ALL NEW TO THIS, ANYONE OUT THERE?

p12mem

IF YOU CAN READ THIS, THAT PROBLEM YOU HAVE IS DEFF SLAVE CYLINDER!

justdragons

Yeah,im going to get it sorted tommorow

p12mem

YOU GOT A STANDARD CLUTCH? AS AN UPRATED PRESURE PLATE CAN PUT A STRAIN ON THE SLAVE AND MASTER CYLINDERS

V3 STI

Cool hope you get it sorted .

Rob .