Nick_05

Hi, I've got a bug eye and it's been de-badged on the bootlid but i want to put the SUBARU letters back on. Can anyone tell me the measurements so i can position them in the right place. The measurements i need are:

1. From the bottom of the boot lid to the bottom of the letters
2. From the left side to the 'S'
3. From the right side to the 'U'
4. The distance between each letter

Any help would be much appreciated.

Nick

corradoboy

I've refitted mine twice now. On my 03 I selotape a piece of white cotton to the bottom inside corner of the clear bit (indicator & rev light) of each rear light to get a straight line (there will be something similar I'm sure on bugeye rear lights). Measure a centre and mark the cotton with a biro. Then move out from the centre 20mm each side of that centre and then every 40mm in each direction (each letter is 40mm and each space is 40mm; except the "A" which is 44mm at its base, but you just overlap it by 2mm each side of the 40mm marks).



HTH

baz69birds

wow
if that dont help, these NO help


Baz

Nick_05

Thanks!!! Thats a big help. I appreciate you taking the time

Nick

pauly

iTrader: (1)

what did you write the numbers in was it chalk or tippex or somethin else
bet it was a b!!gger to clean off

Nick_05

All done now, looks much better! thanks again

Nick