Information requested
#1
Scooby Regular
Thread Starter
Join Date: Mar 2005
Location: www.surreyscoobies.co.uk
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Information requested
I have just bought a pair of clear side repeaterd for my STI V2. I'm not totally stupid he he but was just wondering is it quite an easy job to swap them over and what does this entail
If anybody that can supply any info would be greatfully accepted
Cheers
If anybody that can supply any info would be greatfully accepted
Cheers
#2
The side repeaters are slightly trickier to replace as they are held in with some plastic clips. You need to carefully push the repeater towards the front of the car. This will compress the plastic spring clip and release the clip from the rear of the repeater. The repeater should pivot on the plastic spring clip and pull free from the rear.
Simply unscrew the bulb holder, replace with a silver-coated bulb (if you dont want an orange bulb showing through) and push the new clear repeater back into the whole. Just watch the paintwork.
Good luck
Simply unscrew the bulb holder, replace with a silver-coated bulb (if you dont want an orange bulb showing through) and push the new clear repeater back into the whole. Just watch the paintwork.
Good luck
#4
Scooby Regular
Join Date: Nov 2003
Location: 323bhp.............. Scarborough
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by AndyC_772
Tricky? It's a 5 second job to get them out, then just undo the bulb connector, swap it into the new lens and clip it back in. 30 seconds each side tops.
stevie
Thread
Thread Starter
Forum
Replies
Last Post
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM
warrenm2
Non Scooby Related
45
16 September 2015 07:57 PM