Help Please
#2
how low down has it broken?
If you have enough to get 2 nuts on wind on one nut then the second, wind the two nuts together to form one big nut, they lock together (twist them tight in opposite directions with ring spanners) and you can unscrew the stud, a nice socket on a big bar, with lots of WD40 on the stud from the back, or try a stud extractor, otherwise i suppose drill and tapp i'm afraid
If you have enough to get 2 nuts on wind on one nut then the second, wind the two nuts together to form one big nut, they lock together (twist them tight in opposite directions with ring spanners) and you can unscrew the stud, a nice socket on a big bar, with lots of WD40 on the stud from the back, or try a stud extractor, otherwise i suppose drill and tapp i'm afraid