Bought my car 2-3 years ago from Japan, and shipped to the Caribbean, so any parts I need are imported.

My issue is that when I’m looking for parts my model is not listed. I find WRX, STI or the TS.

Engine : 1.5i NA (EJ15) 5-MT
Year : 2005

Im trying to replace my clutch and I’m not sure if WRX parts from exedy will work. ( https://www.amazon.com/EXEDY-CLUTCH-FJK1006-SUBARU-IMPREZA/dp/B06XT2PGM1/ref=pd_lpo_1?pd_rd_i=B06XT2PGM1&psc=1 )


I’m skeptical because I purchased parts (entire struts x4) from
CarID.com and the rear right strut was off by 1 inch. I tried to put on bigger tires but they would rub against the part the covers the spring.

Any help on identifying what parts I should buy in the west market would be really helpful, thanks.

 

Try Megazip ( who give discounts ) if not Partsouq , if it’s jdm it should be listed , just put in your chassis number 👍

 

Highlighted part codes above are listed below with part numbers on the right

 

Thanks! Honestly I been searching high and low for answers and this has been the biggest help ever. I’ll have a look at the exploder Diagram.

The other fellow above mentioned 2 sites I could check.

For reference my vin is in the pictures below ( GD2 - 006177 )

EDIT : She is RHD and FWD.

 

this is a dream come true, finally a place I can search for parts and they’ll fit 🥲

 

I’d also like to do a conversion, I have front Disks Brakes and Rear Drum Brakes, is there a conversion kit I can purchase or would I have to do some tinkering with other parts from cars in the generation?

 

Confirmed using your actual VIN

 

Thanks mate!

what software is that?

 

search this on here

rear drum to disk conversion

 

Thanks for the pointer, much appreciated.