Hi I am fitting high flow fuel rails to my 95 Impreza and was wondering if there is a fitting guide for the braided lines and fuel pressure regulator like a how to .
I do have loads of fittings and lines thanks
A

 

Are you doing a parallel set up?

 

Very simple though,

Fuel line from filter to fuel rails via a T piece if you're parallel, fuel lines back off other end of fuel rails into a t piece again, single line to FPR then from that to OE return line.

That's assuming you're going with a 2 port FPR, if it's 3 port there's no need for t piece on return line, just run one return line from each fuel rail to FPR, then a single return line from that to tank return.

 

Not to shor yet mate what would you recommend I have a 3port and a2port

 

3 port would be better ideally

 

I've got a 2 port on mine, but that's because I bought it before I knew about 3 ports. To be fair though my cars running some pretty good power and it's fine.