crazyspeedfreakz

iTrader: (92)

Currently on the standard pinks but will be needed to upgrade these soon I've been told 800cc will be needed.

Looking to run between 420-450 bhp and am I right in thinking 800cc are good for 500bhp??

I'm not wanting to chop loom or needing spacers etc, also not wanting re flowed so can any anyone tell me my options taking into account the above..


Thanks, CSF

bustaMOVEs

iTrader: (31)

Yes 800 are fine with a bit of scope, even 740 would be ok but close to max at 500.
I'm not a fan of reflowed either, try get some deatchworks or ID 1000s and you'll be fine for many years if you wish to get a bit more out of em.

banny sti

iTrader: (68)

Idle and driveability wise you wont beat ID1000s and I think the actual flow is closer to 900cc for them

crazyspeedfreakz

iTrader: (92)

Are the newage injectors rated colour wise like the classic, sorry just coming from a classic this is my first delve into newage injectors..

I've been offered a set of Bosch injectors but they have a fitting kit top and bottom of injector and have to cut the plug of and use there plug which seems a little excessive

crazyspeedfreakz

iTrader: (92)

How much generally should I be looking to pay, say I went with the id1000's ?? Just trying to gauge a idea on cost, also if I was to buy used who is best to have them cleaned and tested ?

banny sti

iTrader: (68)

Second hand set of IDs should set you back about 250-300 and as for flow testing pretty sure Matty @ MB can sort that

crazyspeedfreakz

iTrader: (92)

merlin24

iTrader: (1)

Think there were some new ID1000 with plug n play adaptor harnesses on ebay last week

Mick

Dave Y

iTrader: (52)

I have some Ecutek 800cc injectors for sale. £225.

crazyspeedfreakz

iTrader: (92)

Morning peeps .... Ok so I can see the id1000 injectors on eBay for around the £350 mark is anything else needed to fit these or do they connect direct to the original connector..

Also the reason I haven't bought them yet is I'm just abit worried they might be abit oversized for what I need ?? I mean if I only running between 420/450 bhp will they be ok :/

CSF

crazyspeedfreakz

iTrader: (92)

What's people thoughts on these ??

http://www.ebay.co.uk/itm/Injector-D...8AAOSwT~9WlAB7

There id's but 850cc from the states,

Ash Webster

sorry to hijack - what's the best option for 400bhp+ on a v4 sti? I was going to just get my 440's flow matched by by lateral but it seems they aren't doing it anymore on P1 injectors....

imprezagaz

iTrader: (2)

I'm after some too. I emailed as performance and they have them in stock. Good price too

Dave Y

iTrader: (52)

Are these no good to anyone?

crazyspeedfreakz

iTrader: (92)

Hi dave thanks for the offer on these but decided against buying used so buying new.. Cheers again

Dave Y

iTrader: (52)

Ok no problem.

BryanGDB

I have a set of reflowed 800cc blue injectors there £100