I am trying to find some centre caps or atleast the internal and outside face size for the oz superturismo alloys.
I can't find any exact info on size or find any genuine ones and had no reply from oz directly via email.
eBay seems to have a lot of different sizes but all vary by mm's so don't want to order a badly fitting set!
Been searching for months

 

 

Are these the P1 wheels or different ones ? The other thing you have to watch for is the depth of the plastic tongues behind the face. I went a similar path and bought some which looked to be the right diameter but didn't 'press in' far enough for the tongues to catch past the hole. **IF** they are the P1 ones a guy had a lot of 50+ sets of these last year that I bought off eBay and he has 29 sets left by the look of it:- http://www.ebay.co.uk/itm/SET-OF-4-S...EAAOSwDNdVo6as

 

I don't think they are p1 wheels as they came on my type r when imported as far as I'm aware
The diameter of the face seems to be the right size but as you say it all depends on the clips and 50quid is a lot of money if they don't stay in lol,I'm gonna crawl under it later and see if I can find any codes on the inside of the wheel to help

 

Why not just measure the internal & external diameters of the hole?

 

Was waiting for this question lol. the outside face if the cap sits inside the recess is 54mm,I think the inside diameter is between 52-53mm but struggling to get my Stanley fat max tape measure in there to get a accurate reading.
Also in not exactly sure how the cap sit on the wheel wether it sits in the recess or sits flush on the face of the hole.
So I thought I would ask on here as maybe somebody has had the same issue or may have a cap sitting around

 

 

thanks don Clark so I know I need a 54mm face with clips with very little depth

 

they're inside the hole on my sisters just like the wheels above.