TIZERBOY

iTrader: (1)

I know is more than likely been talked about before just can't make my mind up and don't want to pay perrin prices,, going for a fmic very soon and got 3 in mind,, HDI, Japspeed, or Autobahn88,, got a inner wing induction kit so may need to mod the drives side pipe work,, what's you guys thoughts on the 3?

peter zippy reid

iTrader: (25)

Out the three you can afford hdi

boosted

japspeed and autobahn are they same chinese intercooler i thought

MattyB1983

iTrader: (51)

Yep, all ebay Chinese tat. The HDI one uses a better core but the pipework is still shoddy.

If I ever go front mount again i'll buy a decent core and then make the pipework up myself.

peter zippy reid

iTrader: (25)

I hated how my hdi pipework came under engine instead of up by radiator

scoobyman2007

iTrader: (5)

I have a HDI on one car and am going to put a toyosports one on the 2 one and I must say if you are not going for the HDI get a toyosports one as well made mate

Paben

iTrader: (5)

The late Harvey reckoned the under engine set up was best as the hot side pipes were out in the air under the car and there were no sharp bends in the pipework.

Ash Webster

Japspeed will do the job you're after. It's not exactly complex engineering so the cheaper cores are hardly different from the Perrin, just a little bit harder to fit

TIZERBOY

iTrader: (1)

Been looking at the mishimoto one looks mint and good for 600bhp,, can get 15% off the price with amberperfomance, ,
The Japspeed group buy thread was 21 pages long so can't be that crap...

TIZERBOY

iTrader: (1)

Anybody got a newage front bumper picture with a Japspeed fmic fitted?? Under the bonnet pick would be good too...

Cheers..

Sarg400

iTrader: (1)

Nothing wrong with a japseed good piece of kit for the price, if you're going over 500+bhp then would recommend something else.

ryan51

japspeed cooler that previous owner fonzey had fitted.

TIZERBOY

iTrader: (1)

Cheers ryan51.......

ryan51

no dramas.can get some under bonnet shots tomorrow if they are still required.

TIZERBOY

iTrader: (1)

Thanks mate,,, seen under bonnet pic now.. Cheers

Mark10sti

iTrader: (2)

I seem to have no problems with the Japspeed at 500+