bustaMOVEs

iTrader: (31)

These look like a billy bargain for new items, anyone have one and what they like?
http://www.ebay.co.uk/itm/2313237458...%3AMEBIDX%3AIT

Dan wrx

iTrader: (2)

I haven't got them but my mate has in his blobeye, and they are really nice mate, great fit and feel really snug, his are red and black but exactly the same ones, only trouble I found is I'm a bit on the large side, (well 36inch waist 5ft 6) and I found they rub on my sides a bit lol

bustaMOVEs

iTrader: (31)

There is 2 sizes in them, but I'm a 32" waist so I think the smaller one would suit me well as they are recommended for upto 34" waist.
Come with side mounts and rails at that price too.

rob84

iTrader: (5)

Got a set here to fit in my hatch at some point, Very snug fit but very well built seat, comes with side mounts and rails. if your well built you may struggle with the std size.

20140907_112451 by Rostle84, on Flickr

20140907_103255 by Rostle84, on Flickr

bustaMOVEs

iTrader: (31)

Wicked rob, think they might just do.
Im quite slim (bruce lee style)

rob84

iTrader: (5)

Got one of the Pair installed today, Had to make up some mounts to hold fix them into the car, But well worth it.

narelle

If you read down thru description on eBay it says piece of seat could be a scam be carefull

bustaMOVEs

iTrader: (31)

Yeah it's funny that?
It also says 'seat comes with runners and side mounts ready to bolt in complete kit'

Also by kode Motorsport which is a well known company and a authorised supplier.

Rob did you buy them from same seller. Also looks nice in car, did you have to make a plate width ways? Because seat bolts are too narrow for chassis bolts?

rob84

iTrader: (5)

Mine came through a local company Red5automotive, They and authorised dealer. I had to make up subframes for each seat as they are very narrow bases. But they do come with side mounts and sliders as std.

rob84

iTrader: (5)

New corbeau seats fitted by Rostle84, on Flickr

New corbeau seats fitted by Rostle84, on Flickr

New corbeau seats fitted by Rostle84, on Flickr

New corbeau seats fitted by Rostle84, on Flickr

New corbeau seats fitted by Rostle84, on Flickr

bustaMOVEs

iTrader: (31)

Cool. They look like r26 megane seats fitted.

JamesDundee

iTrader: (2)

These look great for the money, like 1/4 of the price of a Recao Pole Position!

ditchmyster

iTrader: (7)

They look great and a bargain at that price, what are they like for comfort and driving position, I like my seat back quite upright, not into laying back while I'm driving as it gives me back ache, also how low are they.

bustaMOVEs

iTrader: (31)

Ditchy, I'm sure with the side mount supplied you would be able to fine ajust it to suit.

stonejedi

iTrader: (51)

The Seat's look Superb in that hatch.SJ.

ditchmyster

iTrader: (7)

I think your right, 3 holes front and rear and I recon i'd be able to pack the rear out with custom mounts too.

ditchmyster

iTrader: (7)

Where are they based and was it the same price?

rob84

iTrader: (5)

I also like to sit bolt upright, and these are perfect in that aspect, height wise not much lower than the std seats in fairness maybe around an inch lower, never really noticed all that much.

Comfort wise I wouldn't like to put a huge amount of weight on in the std size as they are very snug, not tight but not slack either. Hard to describe unless you have a sit in one. I've done 52 miles a day to work for a couple of weeks and there pretty much spot on, no back ache or pains.

rob84

iTrader: (5)

Based local to me in Wigton Cumbria, Same price too

http://www.red5automotive.com/

bustaMOVEs

iTrader: (31)

General price is £159 each or £300 for pair, if you find cheaper then let me know as I have these on my shopping list.

ditchmyster

iTrader: (7)

Gona see if the MRS fancies buying me these for my birthday, already spent my christmas money on silicone pipes and catch can.

cookstar

iTrader: (6)

They're getting bought on payday.

Big sparks

iTrader: (6)

I'm 6ft 1" and 18 stone and trial fitted my ar#e in the xl ones and they was spot on , have since ordered some myself

cookstar

iTrader: (6)

So do these come with enough to install them? What the quality of the mounts/runners like?

bustaMOVEs

iTrader: (31)

Everything comes with it, but you will need to make 2 plates or 4 if buying a pair for the bolts for the rails to bolt to and then bolt to car holes as the rails are a bit narrow for the subaru bolt hols,
Look closely at robs pic on post 6 and 3rd pic down on post 10

MixMan X

iTrader: (7)

Would these be a bit pointless in a road car? Can you use the standard seatbelts?

bustaMOVEs

iTrader: (31)

Use them how you want, if using standard belt, you could remove bolt near bottom door, feed through the hole of seat, the faster part you could wedge it in opposite seat hole.
Easy

bustaMOVEs

iTrader: (31)

I've emailed corberu to try and get a group buy going so we can get a bit of discount off if possible as I've seen there is quite a few folk interested and bought already with good reviews.
I'll update when they get back to me.

Big sparks

iTrader: (6)

Fair play mate , looking forward to mine arriving now , just need to figure out the fitting of them ;-) but will get some pics up as/when they are in ,

crazyspeedfreakz

iTrader: (92)

Nice work busta .... Already looking forward to seeing what they say hopefully its good news