Stripping V3 STi in white...
Stripping V3 STi in white...
Hello,
It's now time for me to start stripping my old V3 STi after the engine let go in Nov 09. Piston No.3 (Shock horror) has lost compression and also the heads for piston's 2/4 have also lost some compression.
So far I've half stripped the engine, so it has no alternator, power steering pump, rad, boost solenoid, inlet, aircon pump. Basicly everything off the main block.
The car as it standard currently;
Everything on the car is up for sale, it had 51,000 on the clocks. Sadly it's had an engine rebuild in the past which resulted in it being a little miss match, has Version 2 sti heads/cams and for some stupid reason a TD04 turbo.
Car has full Sti interior, rear lights, nardi steering wheel and all the normal Sti spec items.
Will sell this as a rolling sheel which includes; suspension struts & springs, drive train, gear box, mainblock which includes heads,cams,cam pulleys etc as I don't have the tools to remove the engine from the car. The shell condition is great, no rust only minor stone chip dents and it was very well looked after as I do mobile detailing.
Everything you can see is for sale, other than the exhaust as it's going on my Type R.
Full pictures and prices up later today, just getting interest as there are so many parts to sell.
Pm me or leave a message here if you want anything and I'll pm you pictures/prices as well.
Extras to sell with prices so far;
Coilpacks - £30
Facelift power steering pump - £30
alternator - Offers?
V3 Inlet manifold - Offers?
2 Port boost solenoid - £10
Autogauge boost gauge - £20
Blitz turbo timer - £20
3 orange label MAFS - £40 each
2 green label MAFS - £25 each
Version 6 TMIC (had it on my V3, fits fine and comes with Y-pipe) - £150 or make me and offer
Standard airbox, inlcuding intake pipe/inner wing snoorkle - £15
Mintex rear pads with 600miles on them (fitment for 1pot rears) - £75 as they cost me £110
Facelift metal header tank no leaks or cracks - £30
2 6S ECU's - Offer?
Bailey BOV - £30
STI seats- £150 collected no rips/marks/*** burns
Nardi steering wheel - offer?
phase 1.5 440 yellow injectors all in working order - £70
Pre-facelift fog covers with STI pink logo - offer?
4 pot calipers in good condition (no pads/discs) - £150
TD04 turbo - £50
Carbon cover dials/clocks - £40
STI rear lights (Sun cracked) - £80
Postage costs sorted out upon request or can be collected. I also don't mind doing local drop off's for some parts.
All exterior and interior parts are up for sale inc dash etc etc.
If anyone would like the shell with the extras it has on currently then please pm me with an offer.
Regards and more pictures on request.
Jamie
It's now time for me to start stripping my old V3 STi after the engine let go in Nov 09. Piston No.3 (Shock horror) has lost compression and also the heads for piston's 2/4 have also lost some compression.
So far I've half stripped the engine, so it has no alternator, power steering pump, rad, boost solenoid, inlet, aircon pump. Basicly everything off the main block.
The car as it standard currently;
Everything on the car is up for sale, it had 51,000 on the clocks. Sadly it's had an engine rebuild in the past which resulted in it being a little miss match, has Version 2 sti heads/cams and for some stupid reason a TD04 turbo.
Car has full Sti interior, rear lights, nardi steering wheel and all the normal Sti spec items.
Will sell this as a rolling sheel which includes; suspension struts & springs, drive train, gear box, mainblock which includes heads,cams,cam pulleys etc as I don't have the tools to remove the engine from the car. The shell condition is great, no rust only minor stone chip dents and it was very well looked after as I do mobile detailing.
Everything you can see is for sale, other than the exhaust as it's going on my Type R.
Full pictures and prices up later today, just getting interest as there are so many parts to sell.
Pm me or leave a message here if you want anything and I'll pm you pictures/prices as well.
Extras to sell with prices so far;
Coilpacks - £30
Facelift power steering pump - £30
alternator - Offers?
V3 Inlet manifold - Offers?
2 Port boost solenoid - £10
Autogauge boost gauge - £20
Blitz turbo timer - £20
3 orange label MAFS - £40 each
2 green label MAFS - £25 each
Version 6 TMIC (had it on my V3, fits fine and comes with Y-pipe) - £150 or make me and offer
Standard airbox, inlcuding intake pipe/inner wing snoorkle - £15
Mintex rear pads with 600miles on them (fitment for 1pot rears) - £75 as they cost me £110
Facelift metal header tank no leaks or cracks - £30
2 6S ECU's - Offer?
Bailey BOV - £30
STI seats- £150 collected no rips/marks/*** burns
Nardi steering wheel - offer?
phase 1.5 440 yellow injectors all in working order - £70
Pre-facelift fog covers with STI pink logo - offer?
4 pot calipers in good condition (no pads/discs) - £150
TD04 turbo - £50
Carbon cover dials/clocks - £40
STI rear lights (Sun cracked) - £80
Postage costs sorted out upon request or can be collected. I also don't mind doing local drop off's for some parts.
All exterior and interior parts are up for sale inc dash etc etc.
If anyone would like the shell with the extras it has on currently then please pm me with an offer.
Regards and more pictures on request.
Jamie
Last edited by xtremewheels; Feb 23, 2010 at 06:07 PM.
Trending Topics
Pictures to be posted up first thing in the morning when it's light,
Regarding the orignal V3 front spats, make me an offer matey.
@bonescnj
Do you want the shell with body panels/engine/box or just the basic shell on it's own? Can strip a good bit down by may need to borrow tools in order to remove others parts so would need to know in advance.
Going to have a look at some of the pictures when it was on the road to get interior photos up.
Regards
Jamie
Regarding the orignal V3 front spats, make me an offer matey.
@bonescnj
Do you want the shell with body panels/engine/box or just the basic shell on it's own? Can strip a good bit down by may need to borrow tools in order to remove others parts so would need to know in advance.
Going to have a look at some of the pictures when it was on the road to get interior photos up.
Regards
Jamie
Got 2 6S Ecu's, Z4/Z5 sat in a box somewhere. Believe the Z4 was a little faulty so if you want the housing I may be able to remove it from that if needed?
As for the brackets they are currently on my Type R, got extended bolts for the other set.
Cheers
Jamie
I'll get the pictures up this evening. Working till 5pm so will sort it all out when I'm home.
Cheers
Jamie
Yes I know, you've posted 3 times asking the same question, can't reply stupidly quick as I've never stripped a car down before and I'm working till 5 or 8 most days! I'll get a price for the shell once I work out what's going to be with it, currently still has gearbox/brakes/drive train/bottom end & heads + turbo left on it. So I may have to try and strip some more bits.
I'll get in contact shortly.
Don't want to split the interior just yet, going to see if someone wants the front + rears, if not I'll let you know.
passange side seat is perfect, drives has no rips or markings just has a little bit of foam missing on the inside due to wear. Nothing major at all.
Pictures will be now taken tomorrow, sorry for the delay didn't get back home until it was dark but I'm off work tomorrow and it's not meant to be snowing.
If people want pictures of close up's or certain 'key' objects then let me know and I'll get them done first thing in the morning.
Regards
Jamie
I'll get in contact shortly.
passange side seat is perfect, drives has no rips or markings just has a little bit of foam missing on the inside due to wear. Nothing major at all.
Pictures will be now taken tomorrow, sorry for the delay didn't get back home until it was dark but I'm off work tomorrow and it's not meant to be snowing.
If people want pictures of close up's or certain 'key' objects then let me know and I'll get them done first thing in the morning.
Regards
Jamie
Shall see what's left on the car tomorrow and let you know what I may need help with.
Regards
Jamie
Haven't got all the pictures yet, sorry for the delay. Ended up with food poisoning and haven't been up to much since Thursday as my energy levels have been awful!
Some photos so far with more to come tomorrow;
Picture showing V6 STI TMIC on a V3/preface lift bonnet fitment, also shows bailey BOV/power steering pump/alternator etc. All of those are for sale; (Old picture pre-stripping engine)
Bailey BOV
One of the orange MAFS, airbox, TMIC
Nardi steering wheel (has a good bit of wear sadly)
STi seats
Only defect with them is here on the drivers side;
Autogauge boost gauge;
Carbon clocks
Best I could do on the 4pots until they are removed when it stops with the awful weather
Some of the other MAFs
The suncracked rear lights, not bad in daylight but can be seen when lights are turned on! Thus the reason they are cheap
More pictures to come tomorrow.
Payments can be sent via paypal or cash on collection
Cheers
Some photos so far with more to come tomorrow;
Picture showing V6 STI TMIC on a V3/preface lift bonnet fitment, also shows bailey BOV/power steering pump/alternator etc. All of those are for sale; (Old picture pre-stripping engine)
Bailey BOV
One of the orange MAFS, airbox, TMIC
Nardi steering wheel (has a good bit of wear sadly)
STi seats
Only defect with them is here on the drivers side;
Autogauge boost gauge;
Carbon clocks
Best I could do on the 4pots until they are removed when it stops with the awful weather
Some of the other MAFs
The suncracked rear lights, not bad in daylight but can be seen when lights are turned on! Thus the reason they are cheap
More pictures to come tomorrow.
Payments can be sent via paypal or cash on collection
Cheers
Thread
Thread Starter
Forum
Replies
Last Post