GARAGE SPACE NEEDED : New List.
Thread Starter
Former Sponsor
iTrader: (48)
Joined: Mar 2001
Posts: 10,419
Likes: 1
From: Darlington
GARAGE SPACE NEEDED : New List.
PHOTOS BELOW
NEW ITEMS ADDED BELOW. SEE PHOTOS.
Forge. VTA BOV Stand alone STi 3 or 4 type with link pipe.
New Age cold air kit with filter in inner wing. New. £150.00 plus delivery. New.
STi 3 Top Mount Intercooler with Air Charge Temperature guage complete with sender already fitted. Red joiner and Y. See photos.
Same size as P1/STi 6, STi 5, etc Core= 365 X 150. Overall, 420 X 255. £175 inclusive of delivery and Paypal.
STi 3 Front and Rear Calipers
STi 3 Front Brake Discs and Pads. Good condition. 295 mm diameter.
STi 3/4 Inlet Manifold cleaned and grit blasted and ready to paint. £65 inc postage.
Turbo blanket (will do two cars). £85 inc. postage.
Power Stabiliser and Earthing Kit. £70 inc postage.
4 no. Phase II yellow 440cc injectors.
STi 3/4 instrument pod with white dials. £100 inc. Paypal and postage.
WRX 95/96 ECU D19 4 Plug.
STi 3 ECU 6S MY 97 (including RA). 3 Plug.
STi 3 or 4 coil pack. New no longer required.
BOV flange adaptor GDB and GC8.
OE uppipe with good heatshield. No rattles.
Oil catch tank. New. Boxed.
Alternator.
Starter motor.
2no. STi Classic Wishbones. Alloy.
2 no. steel wishbones with ball joints. Good condition.
STi 3/4 gearbox. Good condition. Can be tested in car. Not yet removed.
Air con radiator. Pipework, pump, condenser, etc.
Passenger side wind deflector.
Pair of roof rails from STi 3 Wagon
Pillar pod with Greddy oil pressure to 10 bar, water temperature to 150.C also EGT to 1200.C.
Boost/Vacuum guage Greddy -.7 +1.6
Lightweight Power Steering Pulley : 255 grammes: £25.00 plus postage. See Photos.
OE Subaru Wheels and Vredestein Tyres : 205 x 55 x 16 : Refurbished in Silver. Centre Caps. These wheels are in very good condition. One has a very small chip on the rim.
One has tyre weight damage thanks to an ignorant tyre fitter. See photos. Balanced with stick on weights and otherwise as new. Tyres are Vredestein Giugaro Ultrac. 4.5 - 5mm. These tyres won Auto Express "Best Tyre Competition" two years in a row and are exceptionally good in the wet. £200 ovno. (Refurb cost £120) See photos.
If you have an interest in any of the above please contact :
harveysmith1@btopenworld.com
Brakes
Dials, ECU etc.
Switch, Coil Pack. Lockwood, ECUs, Flange adaptors, etc.
STi Clocks : White dials.
3/4 Inlet Manifold : Prepared and ready to paint.
OE 95 WRX Bucket Seat and passenger seat.
Very Supportive. Two holes due to wear and tear in driver's seat.
Free to a good home. You pay transport.
Cold Air Kit for New Age.
Consisting of replacement MAF housing, joiner with bracket,
pipe into inner wing, and clamps along with K+N filter. £150.00 plus delivery
Speedo Cable
Clutch Slave Cylinder
Screen Washer Bottle Pumps
Plastic Pulley Wheels STi 3/4
Throttle Cable
Clear Nearside Indicator STi 3/4
STi 3/4 BOV
Zinc die cast header tank with pressure cap
Silicon Inlet Manifold Tract modified for ease of fitment and operation without MAF sensor.
This was on a 2 litre producing close to 600 bhp.
Lightweight Power Steering Pulley : 255 grams.
OE Subaru Wheels and Tyres : 205 55 16.
Minor nick.
Tyre weight damage.
STi 3 TMIC with Air Charge Temperature Guage complete with "Y" pipes etc.
Forge VTA BOV and pipe
NEW ITEMS ADDED BELOW. SEE PHOTOS.
Forge. VTA BOV Stand alone STi 3 or 4 type with link pipe.
New Age cold air kit with filter in inner wing. New. £150.00 plus delivery. New.
STi 3 Top Mount Intercooler with Air Charge Temperature guage complete with sender already fitted. Red joiner and Y. See photos.
Same size as P1/STi 6, STi 5, etc Core= 365 X 150. Overall, 420 X 255. £175 inclusive of delivery and Paypal.
STi 3 Front and Rear Calipers
STi 3 Front Brake Discs and Pads. Good condition. 295 mm diameter.
STi 3/4 Inlet Manifold cleaned and grit blasted and ready to paint. £65 inc postage.
Turbo blanket (will do two cars). £85 inc. postage.
Power Stabiliser and Earthing Kit. £70 inc postage.
4 no. Phase II yellow 440cc injectors.
STi 3/4 instrument pod with white dials. £100 inc. Paypal and postage.
WRX 95/96 ECU D19 4 Plug.
STi 3 ECU 6S MY 97 (including RA). 3 Plug.
STi 3 or 4 coil pack. New no longer required.
BOV flange adaptor GDB and GC8.
OE uppipe with good heatshield. No rattles.
Oil catch tank. New. Boxed.
Alternator.
Starter motor.
2no. STi Classic Wishbones. Alloy.
2 no. steel wishbones with ball joints. Good condition.
STi 3/4 gearbox. Good condition. Can be tested in car. Not yet removed.
Air con radiator. Pipework, pump, condenser, etc.
Passenger side wind deflector.
Pair of roof rails from STi 3 Wagon
Pillar pod with Greddy oil pressure to 10 bar, water temperature to 150.C also EGT to 1200.C.
Boost/Vacuum guage Greddy -.7 +1.6
Lightweight Power Steering Pulley : 255 grammes: £25.00 plus postage. See Photos.
OE Subaru Wheels and Vredestein Tyres : 205 x 55 x 16 : Refurbished in Silver. Centre Caps. These wheels are in very good condition. One has a very small chip on the rim.
One has tyre weight damage thanks to an ignorant tyre fitter. See photos. Balanced with stick on weights and otherwise as new. Tyres are Vredestein Giugaro Ultrac. 4.5 - 5mm. These tyres won Auto Express "Best Tyre Competition" two years in a row and are exceptionally good in the wet. £200 ovno. (Refurb cost £120) See photos.
If you have an interest in any of the above please contact :
harveysmith1@btopenworld.com
Brakes
Dials, ECU etc.
Switch, Coil Pack. Lockwood, ECUs, Flange adaptors, etc.
STi Clocks : White dials.
3/4 Inlet Manifold : Prepared and ready to paint.
OE 95 WRX Bucket Seat and passenger seat.
Very Supportive. Two holes due to wear and tear in driver's seat.
Free to a good home. You pay transport.
Cold Air Kit for New Age.
Consisting of replacement MAF housing, joiner with bracket,
pipe into inner wing, and clamps along with K+N filter. £150.00 plus delivery
Speedo Cable
Clutch Slave Cylinder
Screen Washer Bottle Pumps
Plastic Pulley Wheels STi 3/4
Throttle Cable
Clear Nearside Indicator STi 3/4
STi 3/4 BOV
Zinc die cast header tank with pressure cap
Silicon Inlet Manifold Tract modified for ease of fitment and operation without MAF sensor.
This was on a 2 litre producing close to 600 bhp.
Lightweight Power Steering Pulley : 255 grams.
OE Subaru Wheels and Tyres : 205 55 16.
Minor nick. Tyre weight damage.STi 3 TMIC with Air Charge Temperature Guage complete with "Y" pipes etc.
Forge VTA BOV and pipe
Last edited by harvey; Aug 19, 2007 at 02:17 PM.
STi 3/4 Inlet Manifold complete less Injectors. Inlet tract, fuel rails, FPR, throttle body, ICVS, coil pack, leads etc.
Sold to me.
Received the manifold this morning on next day delivery.
Thanks Harvey.
Highly recommend buying from Harvey, Top bloke.
Sold to me.
Received the manifold this morning on next day delivery.
Thanks Harvey.
Highly recommend buying from Harvey, Top bloke.
Last edited by bluerigster; Jul 26, 2007 at 05:18 PM.
Trending Topics
Thread Starter
Former Sponsor
iTrader: (48)
Joined: Mar 2001
Posts: 10,419
Likes: 1
From: Darlington
I am in Darlington.
Cheers Martin.
Chris : Which dump valve mate? I have STi 3/4 O.E., STi 5/6 O/E, 53 plate New Age and a Forge VTA with a rubber pipe attached.
Make me a fair offer for any or all.
Cheers Martin.
Chris : Which dump valve mate? I have STi 3/4 O.E., STi 5/6 O/E, 53 plate New Age and a Forge VTA with a rubber pipe attached.
Make me a fair offer for any or all.
hi harvey thanks for the speedy delivery of the white dials and fog switch..just need to know how im going to wire the fog switch in especially without a plug on the back...dont suppose you have any ideas on how to do this do you?
Thread Starter
Former Sponsor
iTrader: (48)
Joined: Mar 2001
Posts: 10,419
Likes: 1
From: Darlington
Hi Codfather: As far as I knew/know it was a complete switch.
Do you want the plug that is attached to the wiring loom?
You should have e-mailed as it would have received a quicker response.
Do you want the plug that is attached to the wiring loom?
You should have e-mailed as it would have received a quicker response.
Thread Starter
Former Sponsor
iTrader: (48)
Joined: Mar 2001
Posts: 10,419
Likes: 1
From: Darlington
I found your post above, copied below, upsetting.
I was advertising a fog light switch and I posted at least two photographs of a fog light switch.
All your previous correspondence was by e-mail and dealt with expediently but when you did not get what you wanted you chose to post on a public forum giving the clear impression you did not get what you needed.
Well you didn't get what you needed because I was only selling a switch. If you had asked for a plug I would have dealt with that at the time of your enquiry but having posted two photographs of a switch without a plug and at no time was a plug mentioned I was quite happy to supply you with the switch and Lockwood white dial kit for £15 inclusive of Paypal and postage.
You have to realise I am not a mind reader and if you don't ask for what you need and still expect me to send it you have a problem.
I now have this e-mail.
The plug is attached to a wiring harness so most people will be reluctant to cut the plug from an existing good harness.
Without the switch it may be difficult to identify the plug to suit the switch as the wiring harness will be removed from the car. I will look for a plug on the harness today but my search might be assisted if I had a photograph sent to my e-mail address showing the back of the switch.
If I have the plug in the meantime I will let you know.
I was advertising a fog light switch and I posted at least two photographs of a fog light switch.
All your previous correspondence was by e-mail and dealt with expediently but when you did not get what you wanted you chose to post on a public forum giving the clear impression you did not get what you needed.
..just need to know how im going to wire the fog switch in especially without a plug on the back...dont suppose you have any ideas on how to do this do you?
You have to realise I am not a mind reader and if you don't ask for what you need and still expect me to send it you have a problem.
I now have this e-mail.
Hi Harvey,
Regarding the plug for the fog light switch..would you happen to have it kicking about at all because it would make it alot easier for me to wire it in(hopefully
Sorry for the inconvienience, plus i should of emailed you first i didnt think doh!
Kind regards, simon
Regarding the plug for the fog light switch..would you happen to have it kicking about at all because it would make it alot easier for me to wire it in(hopefully
Sorry for the inconvienience, plus i should of emailed you first i didnt think doh!
Kind regards, simon
Without the switch it may be difficult to identify the plug to suit the switch as the wiring harness will be removed from the car. I will look for a plug on the harness today but my search might be assisted if I had a photograph sent to my e-mail address showing the back of the switch.
If I have the plug in the meantime I will let you know.
harvey,
I do not hold you responsible for my misunderstanding, as far as im concerned its merely an oversight on my part and i sincerly hope i have not discredited your name on this site or personally.
I didnt realise you took this to be an upsetting comment and if i knew i would have removed my earlier post, so please accept my apologies.
I hope this clears this matter up for once and all.
Simon
I do not hold you responsible for my misunderstanding, as far as im concerned its merely an oversight on my part and i sincerly hope i have not discredited your name on this site or personally.
I didnt realise you took this to be an upsetting comment and if i knew i would have removed my earlier post, so please accept my apologies.
I hope this clears this matter up for once and all.
Simon
Thread Starter
Former Sponsor
iTrader: (48)
Joined: Mar 2001
Posts: 10,419
Likes: 1
From: Darlington
Cheers Codfather.
I have been to Import Car Parts, West Auckland, John Pye Motors, Bishop Auckland and DLM but nobody has a wiring loom. There is an STi 4 car at Tyne TeesTuning which should have a plug on the loom but the guy there, Steve, was not in when I called. As he will not have the switch, he may need a photo of the back of the plug so he can ID the right plug.
s.stacey26@btinternet.com or 07974601953.
I have been to Import Car Parts, West Auckland, John Pye Motors, Bishop Auckland and DLM but nobody has a wiring loom. There is an STi 4 car at Tyne TeesTuning which should have a plug on the loom but the guy there, Steve, was not in when I called. As he will not have the switch, he may need a photo of the back of the plug so he can ID the right plug.
s.stacey26@btinternet.com or 07974601953.
Roof bars are they for clasic
PHOTOS BELOW
NEW ITEMS ADDED BELOW. SEE PHOTOS.
Forge. VTA BOV Stand alone STi 3 or 4 type with link pipe.
New Age cold air kit with filter in inner wing. New. £150.00 plus delivery. New.
STi 3 Top Mount Intercooler with Air Charge Temperature guage complete with sender already fitted. Red joiner and Y. See photos.
Same size as P1/STi 6, STi 5, etc Core= 365 X 150. Overall, 420 X 255. £175 inclusive of delivery and Paypal.
STi 3 Front and Rear Calipers
STi 3 Front Brake Discs and Pads. Good condition. 295 mm diameter.
Hi
Interested in the roof bars will they fit 96 UK clasic.
How much shiped to Lancashire.
Thanks
WRX 93-96 front grooved discs. Good condition. 278 mm diameter.
STi 3/4 Inlet Manifold cleaned and grit blasted and ready to paint. £65 inc postage.
Turbo blanket (will do two cars). £85 inc. postage.
Power Stabiliser and Earthing Kit. £70 inc postage.
4 no. Phase II yellow 440cc injectors.
STi 3/4 instrument pod with white dials.
STi 3 instrument pod O/E dials. £100 inc. Paypal and postage.
WRX 95/96 ECU D19 4 Plug.
STi 3 ECU 6S MY 97 (including RA). 3 Plug.
STi 3 or 4 coil pack. One new no longer required and one secondhand.
Fog light switch.
BOV flange adaptor GDB and GC8.
OE uppipe with good heatshield. No rattles.
Oil catch tank. New. Boxed.
Oil catch can secondhand. £25 plus postage.
Alternator.
Starter motor.
2 no. steel wishbones with ball joints. Good condition.
STi 3/4 gearbox. Good condition. Can be tested in car. Not yet removed.
Air con radiator. Pipework, pump, condenser, etc.
Passenger side wind deflector.
Pair of roof rails from STi 3 Wagon
Pillar pod with Greddy oil pressure to 10 bar, water temperature to 150.C also EGT to 1200.C.
Boost/Vacuum guage Greddy -.7 +1.6
Lightweight Power Steering Pulley : 255 grammes: £25.00 plus postage. See Photos.
OE Subaru Wheels and Vredestein Tyres : 205 x 55 x 16 : Refurbished in Silver. Centre Caps. These wheels are in very good condition. One has a very small chip on the rim.
One has tyre weight damage thanks to an ignorant tyre fitter. See photos. Balanced with stick on weights and otherwise as new. Tyres are Vredestein Giugraro Ultrac. 4.5 - 5mm. These tyres won Auto Express "Best Tyre Competition" two years in a row and are exceptionally good in the wet. £200 ovno. (Refurb cost £120) See photos.
If you have an interest in any of the above please contact :
harveysmith1@btopenworld.com
Brakes
Dials, ECU etc.
Switch, Coil Pack. Lockwood, ECUs, Flange adaptors, etc.
STi Clocks : White dials.
STi Clocks : OE with speedo converter.
STi 3/4 Inlet Manifold : Prepared and ready to paint.
STi 3/4 Inlet Manifold : Complete less injectors.
OE 95 WRX Bucket Seat.
Very Supportive. Two holes due to wear and tear
Free to a good home. You pay transport.
Cold Air Kit for New Age.
Consisting of replacement MAF housing, joiner with bracket,
pipe into inner wing, and clamps along with K+N filter. £150.00 plus delivery
Speedo Cable
Clutch Slave Cylinder
Screen Washer Bottle Pumps
Plastic Pulley Wheels STi 3/4
Throttle Cable
Clear Nearside Indicator STi 3/4
STi 3/4 BOV
Zinc die cast header tank with pressure cap
Silicon Inlet Manifold Tract modified for ease of fitment and operation without MAF sensor.
This was on a 2 litre producing close to 600 bhp.
Lightweight Power Steering Pulley : 255 grams.
OE Subaru Wheels and Tyres : 205 55 16.
Minor nick.
Tyre weight damage.
STi 3 TMIC with Air Charge Temperature Guage complete with "Y" pipes etc.
Forge VTA BOV and pipe
NEW ITEMS ADDED BELOW. SEE PHOTOS.
Forge. VTA BOV Stand alone STi 3 or 4 type with link pipe.
New Age cold air kit with filter in inner wing. New. £150.00 plus delivery. New.
STi 3 Top Mount Intercooler with Air Charge Temperature guage complete with sender already fitted. Red joiner and Y. See photos.
Same size as P1/STi 6, STi 5, etc Core= 365 X 150. Overall, 420 X 255. £175 inclusive of delivery and Paypal.
STi 3 Front and Rear Calipers
STi 3 Front Brake Discs and Pads. Good condition. 295 mm diameter.
Hi
Interested in the roof bars will they fit 96 UK clasic.
How much shiped to Lancashire.
Thanks
WRX 93-96 front grooved discs. Good condition. 278 mm diameter.
STi 3/4 Inlet Manifold cleaned and grit blasted and ready to paint. £65 inc postage.
Turbo blanket (will do two cars). £85 inc. postage.
Power Stabiliser and Earthing Kit. £70 inc postage.
4 no. Phase II yellow 440cc injectors.
STi 3/4 instrument pod with white dials.
STi 3 instrument pod O/E dials. £100 inc. Paypal and postage.
WRX 95/96 ECU D19 4 Plug.
STi 3 ECU 6S MY 97 (including RA). 3 Plug.
STi 3 or 4 coil pack. One new no longer required and one secondhand.
Fog light switch.
BOV flange adaptor GDB and GC8.
OE uppipe with good heatshield. No rattles.
Oil catch tank. New. Boxed.
Oil catch can secondhand. £25 plus postage.
Alternator.
Starter motor.
2 no. steel wishbones with ball joints. Good condition.
STi 3/4 gearbox. Good condition. Can be tested in car. Not yet removed.
Air con radiator. Pipework, pump, condenser, etc.
Passenger side wind deflector.
Pair of roof rails from STi 3 Wagon
Pillar pod with Greddy oil pressure to 10 bar, water temperature to 150.C also EGT to 1200.C.
Boost/Vacuum guage Greddy -.7 +1.6
Lightweight Power Steering Pulley : 255 grammes: £25.00 plus postage. See Photos.
OE Subaru Wheels and Vredestein Tyres : 205 x 55 x 16 : Refurbished in Silver. Centre Caps. These wheels are in very good condition. One has a very small chip on the rim.
One has tyre weight damage thanks to an ignorant tyre fitter. See photos. Balanced with stick on weights and otherwise as new. Tyres are Vredestein Giugraro Ultrac. 4.5 - 5mm. These tyres won Auto Express "Best Tyre Competition" two years in a row and are exceptionally good in the wet. £200 ovno. (Refurb cost £120) See photos.
If you have an interest in any of the above please contact :
harveysmith1@btopenworld.com
Brakes
Dials, ECU etc.
Switch, Coil Pack. Lockwood, ECUs, Flange adaptors, etc.
STi Clocks : White dials.
STi Clocks : OE with speedo converter.
STi 3/4 Inlet Manifold : Prepared and ready to paint.
STi 3/4 Inlet Manifold : Complete less injectors.
OE 95 WRX Bucket Seat.
Very Supportive. Two holes due to wear and tear
Free to a good home. You pay transport.
Cold Air Kit for New Age.
Consisting of replacement MAF housing, joiner with bracket,
pipe into inner wing, and clamps along with K+N filter. £150.00 plus delivery
Speedo Cable
Clutch Slave Cylinder
Screen Washer Bottle Pumps
Plastic Pulley Wheels STi 3/4
Throttle Cable
Clear Nearside Indicator STi 3/4
STi 3/4 BOV
Zinc die cast header tank with pressure cap
Silicon Inlet Manifold Tract modified for ease of fitment and operation without MAF sensor.
This was on a 2 litre producing close to 600 bhp.
Lightweight Power Steering Pulley : 255 grams.
OE Subaru Wheels and Tyres : 205 55 16.
Minor nick. Tyre weight damage.STi 3 TMIC with Air Charge Temperature Guage complete with "Y" pipes etc.
Forge VTA BOV and pipe
Thread Starter
Former Sponsor
iTrader: (48)
Joined: Mar 2001
Posts: 10,419
Likes: 1
From: Darlington
Cheers Dave. A pleasure doing business with you.
Roof bars inclusive of next day delivery and Paypal, £40.
where abouts in Lancs? I am in Carnforth on Friday.
Price includes an estimated£10 for delivery.
Roof bars inclusive of next day delivery and Paypal, £40.
where abouts in Lancs? I am in Carnforth on Friday.
Price includes an estimated£10 for delivery.
Last edited by harvey; Aug 14, 2007 at 03:56 PM.
Scooby Newbie
Joined: Mar 2006
Posts: 21
Likes: 0
From: Ireland
ALright Harvey.
How much for a dumpvalve and fitting kit for ver 3 sti? Oh and postage across the pond to Ireland.
Also what part number is on the coil pack? I'd be interested in that too if it fitted?
How much for a dumpvalve and fitting kit for ver 3 sti? Oh and postage across the pond to Ireland.
Also what part number is on the coil pack? I'd be interested in that too if it fitted?
Last edited by Omeara_darragh; Aug 14, 2007 at 06:28 PM. Reason: changed
Thread Starter
Former Sponsor
iTrader: (48)
Joined: Mar 2001
Posts: 10,419
Likes: 1
From: Darlington
The BOV for STi 3 or 4 is £30 and delivery £6.50.
The secondhand coil pack is sold. the new coil pack is for STi 3 or 4 and will fit any ver 3 or 4 car. It is a genuine Subaru item. The box is marked CB20 and the coil is marked : DIAMOND. F-569 12V
6000003
The secondhand coil pack is sold. the new coil pack is for STi 3 or 4 and will fit any ver 3 or 4 car. It is a genuine Subaru item. The box is marked CB20 and the coil is marked : DIAMOND. F-569 12V
6000003
Thread
Thread Starter
Forum
Replies
Last Post
MH-Racing
Subaru Parts
18
Oct 18, 2015 04:49 PM
robbie1988
Wanted
2
Sep 13, 2015 09:25 AM
Scooby-Doo 2
Wheels And Tyres For Sale
1
Sep 9, 2015 06:51 PM
