FOR Sale Full AP Big Brake Kit - Have only done 500 miles ROAD use
Thread Starter
Scooby Newbie
Joined: Jan 2009
Posts: 13
Likes: 0
FOR Sale Full AP Big Brake Kit - Have only done 500 miles ROAD use
NOW SOLD
A set of AP Racing brake kits both front and back.
These brakes have done 500 miles of ROAD use only and performed perfectly, they were ran in as per the AP recommendations and should therefore give many miles of untroubled driving.
They were on the car through the winter so there is a little rust on some of the bolts and disks, but nothing that won’t clean up with a little elbow grease and proper cleaner. They were literally just wiped over for the photos using brake cleaner, nothing more.
They are less than 12 months old and I am unsure what the situation is with regards the 12 months manufacturer’s warranty? It should hopefully transfer to the new owner? I will send the original receipt as part of the purchase.
They were removed from the car to put it back to standard as I had originally planned on going for a serious power upgrade and wanted to sort the brakes and handling first. I am no longer going ahead with this project so they are up for sale.
Please note they were not purchased from Roger Clark as they were out of stock, I managed to get them from Max at Car Planet.
355mm x 32mm Grooved disks 6 Pots with Black calipers on the front
Ferodo DS2500 pads
Original retail price £1744.07 inc VAT
Link to Roger Clark for all of the technical details
http://www.rogerclarkmotorsport.co.uk/shop_detail.asp?productID=692
335mm x 24mm Grooved with Black Calipers on the rear
Ferodo DS2500 pads
Original retail price £1143.12 inc vat
http://www.rogerclarkmotorsport.co.uk/shop_detail.asp?productID=731
These kits are designed to fit 18 inch wheels and I had them fitted to my 56 plate RB320 with no issues if however you want to check the clearance for yourself download a pdf from the following link which is a template you can measure against.
http://www.rogerclarkmotorsport.co.uk/public/355mm%20brake%20profile.pdf
They come with the Goodridge TUV approved steel braided hoses with nylon armour protection
Finally the bell housings were painted black to match my car using special heat resistant paint, this is clearly shown in the photos it has started to come away in places, it would be worthwhile re-painting to tidy them up or colour match to your car which ever you prefer.
I have had a few offers to split them with some people only wanting the fronts etc, I would prefer to sell them as a complete kit.
NOW SOLD to fellow RB320 owner
As you will appreciate these are fairly heavy so local pick up preferred, however if you want them posted please contact me and I can get a quote which will be added to the sale price.
Located in Central Scotland.
Feel free to PM me, give me a call or email me with any questions.
Mobile – 07825 176669
Email – scottbuchanan76(at)googlemail(dot)com
A set of AP Racing brake kits both front and back.
These brakes have done 500 miles of ROAD use only and performed perfectly, they were ran in as per the AP recommendations and should therefore give many miles of untroubled driving.
They were on the car through the winter so there is a little rust on some of the bolts and disks, but nothing that won’t clean up with a little elbow grease and proper cleaner. They were literally just wiped over for the photos using brake cleaner, nothing more.
They are less than 12 months old and I am unsure what the situation is with regards the 12 months manufacturer’s warranty? It should hopefully transfer to the new owner? I will send the original receipt as part of the purchase.
They were removed from the car to put it back to standard as I had originally planned on going for a serious power upgrade and wanted to sort the brakes and handling first. I am no longer going ahead with this project so they are up for sale.
Please note they were not purchased from Roger Clark as they were out of stock, I managed to get them from Max at Car Planet.
355mm x 32mm Grooved disks 6 Pots with Black calipers on the front
Ferodo DS2500 pads
Original retail price £1744.07 inc VAT
Link to Roger Clark for all of the technical details
http://www.rogerclarkmotorsport.co.uk/shop_detail.asp?productID=692
335mm x 24mm Grooved with Black Calipers on the rear
Ferodo DS2500 pads
Original retail price £1143.12 inc vat
http://www.rogerclarkmotorsport.co.uk/shop_detail.asp?productID=731
These kits are designed to fit 18 inch wheels and I had them fitted to my 56 plate RB320 with no issues if however you want to check the clearance for yourself download a pdf from the following link which is a template you can measure against.
http://www.rogerclarkmotorsport.co.uk/public/355mm%20brake%20profile.pdf
They come with the Goodridge TUV approved steel braided hoses with nylon armour protection
Finally the bell housings were painted black to match my car using special heat resistant paint, this is clearly shown in the photos it has started to come away in places, it would be worthwhile re-painting to tidy them up or colour match to your car which ever you prefer.
I have had a few offers to split them with some people only wanting the fronts etc, I would prefer to sell them as a complete kit.
NOW SOLD to fellow RB320 owner
As you will appreciate these are fairly heavy so local pick up preferred, however if you want them posted please contact me and I can get a quote which will be added to the sale price.
Located in Central Scotland.
Feel free to PM me, give me a call or email me with any questions.
Mobile – 07825 176669
Email – scottbuchanan76(at)googlemail(dot)com
Last edited by ScottyRB320; Jun 18, 2009 at 09:05 AM. Reason: Sold
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
Jan 11, 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
Dec 14, 2015 08:16 AM
jonnyboy82
Wheels And Tyres For Sale
8
Sep 21, 2015 10:26 PM
