V3 STI heads
Thread Starter
Scooby Regular
Joined: Jun 2008
Posts: 434
Likes: 0
From: Essex
V3 STI heads
As above fully ported, inconell exhaust valves, piper race cams complete with buckets and shims springs, ect,these are perfect condition done 800 miles since full rebuild they do not rattle or tap badly when running but not as quiet as stock as the cam profile is quiet agressive,
The ONLY reason they are for sale is the engine is now going in a newage so later heads will make this easier,
£1000 ( been told by a big name expert this set up is worth about £1500) Phase1 intake manifold complete with throttle body ect £70 or free with above heads although it was never run on these heads,
Excedy single plate ceramic paddle clutch 800 miles only,
like new £250
Also for sale
Tracktive solutions Track day special full exhaust with cat, ok for over 500 hp
perfect condition
£500
1997 type R sti. 75000m still in good condition
Hyperflow monster FMIC well maintained
the most raw scooby ever made first of the type R's
see my profile for pics,
Car £5750,
car and all spares listed in this post ( only applies untill i sell some parts)£7,500
sale of the century,
Owen Subaru 475+ bhp Garrett Ball BearingTurbo OD1711
Designed and developed by Owen Developments. It is an increased volume cast turbine housing with solid billet inconel wastegate assembly which fits standard Subaru manifold and downpipe and incorporates the Garrett Ball Bearing Cartridge range. Most suited to very highly tuned 2 ltr, 2.2 ltr and 2.5 ltr engine conversions. Supplied with 1.2 bar actuator setting. This turbo is capable of upto and beyond 475 bhp depending on engine specification. New its £1275+vat
this turbo is 1 year old not many miles never tracked VGC
£800
Simtec ECU from V3 classic fitted by JGM
standard engine back in the car
anti lag/launch controll
£600
Its a 3 Plug ECU
used but good condition 2.5 crank £125
Open deck 2.0 block halves £50
2.0 Standard STI Forged pistons with rods £75
used but good 2.0 centre thrust crank £75
alternater/air con pump £50
v2 Maf £45
The ONLY reason they are for sale is the engine is now going in a newage so later heads will make this easier,
£1000 ( been told by a big name expert this set up is worth about £1500) Phase1 intake manifold complete with throttle body ect £70 or free with above heads although it was never run on these heads,
Excedy single plate ceramic paddle clutch 800 miles only,
like new £250
Also for sale
Tracktive solutions Track day special full exhaust with cat, ok for over 500 hp
perfect condition
£500
1997 type R sti. 75000m still in good condition
Hyperflow monster FMIC well maintained
the most raw scooby ever made first of the type R's
see my profile for pics,
Car £5750,
car and all spares listed in this post ( only applies untill i sell some parts)£7,500
sale of the century,
Owen Subaru 475+ bhp Garrett Ball BearingTurbo OD1711
Designed and developed by Owen Developments. It is an increased volume cast turbine housing with solid billet inconel wastegate assembly which fits standard Subaru manifold and downpipe and incorporates the Garrett Ball Bearing Cartridge range. Most suited to very highly tuned 2 ltr, 2.2 ltr and 2.5 ltr engine conversions. Supplied with 1.2 bar actuator setting. This turbo is capable of upto and beyond 475 bhp depending on engine specification. New its £1275+vat
this turbo is 1 year old not many miles never tracked VGC
£800
Simtec ECU from V3 classic fitted by JGM
standard engine back in the car
anti lag/launch controll
£600
Its a 3 Plug ECU
used but good condition 2.5 crank £125
Open deck 2.0 block halves £50
2.0 Standard STI Forged pistons with rods £75
used but good 2.0 centre thrust crank £75
alternater/air con pump £50
v2 Maf £45
Last edited by Badbird; Nov 10, 2008 at 04:00 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
