Breaking 95 WRX Wagon Silver
Thread Starter
Scooby Regular
Joined: Jul 2001
Posts: 225
Likes: 0
From: Northants
Breaking 95 WRX Wagon Silver - Remaining Parts
Mostly mechanical parts only left now. PM me with any questions.
My 1995 5 door WRX JDM spec import has come to the end of the line. Car is in Northants and I can take PayPal (Agreed price plus 5% to cover commissions.)
Remaining parts are listed below but you need to note the following:
Gearbox was only rebuilt 40,000 miles ago by Autosportif with a new gear set (with rear diff makes a good grearing down option for UK car - who needs 140+ mph top when you can get to 130 mph like a rocket on the same power?) Turbo is a TD04.
Upgrades in addition to standard parts available include:
Sump guard (mounts on fabricated tube between front chassis rails)
Spare intercooler
OS twin plate clutch (part worn) with lightened fly wheel and slave cylinder conversion kit
STi back box
96MY standard gear shift (Had a Prodrive QS fitted to my previous car)
I have the following still to sell after disposing of the shell:
All suspension struts and top mounts
Gearbox 4.111 ratio (UKs are 3.9 STis are 4.444)
Diff ratio as above
Propshaft
Steering rack
Air con rad
Alternator
Starter motor
Rear sub-frame
Turbo - TD04
Head lights (Manual not electric adjust)
Tail lights (Wagon)
Door mirrors (electric folding)
Inlet manifold
STi back box
Intercooler
Clutch - less than 50% worn (AP Borg Warner replacement standard spec clutch) with release bearing
Flywheel with spigot bearing
Rear Hub, right hand side
My 1995 5 door WRX JDM spec import has come to the end of the line. Car is in Northants and I can take PayPal (Agreed price plus 5% to cover commissions.)
Remaining parts are listed below but you need to note the following:
Gearbox was only rebuilt 40,000 miles ago by Autosportif with a new gear set (with rear diff makes a good grearing down option for UK car - who needs 140+ mph top when you can get to 130 mph like a rocket on the same power?) Turbo is a TD04.
Upgrades in addition to standard parts available include:
Sump guard (mounts on fabricated tube between front chassis rails)
Spare intercooler
OS twin plate clutch (part worn) with lightened fly wheel and slave cylinder conversion kit
STi back box
96MY standard gear shift (Had a Prodrive QS fitted to my previous car)
I have the following still to sell after disposing of the shell:
All suspension struts and top mounts
Gearbox 4.111 ratio (UKs are 3.9 STis are 4.444)
Diff ratio as above
Propshaft
Steering rack
Air con rad
Alternator
Starter motor
Rear sub-frame
Turbo - TD04
Head lights (Manual not electric adjust)
Tail lights (Wagon)
Door mirrors (electric folding)
Inlet manifold
STi back box
Intercooler
Clutch - less than 50% worn (AP Borg Warner replacement standard spec clutch) with release bearing
Flywheel with spigot bearing
Rear Hub, right hand side
Last edited by CMA; Mar 21, 2006 at 10:16 PM. Reason: Updated info
wagon bits
Trending Topics
Thread Starter
Scooby Regular
Joined: Jul 2001
Posts: 225
Likes: 0
From: Northants
Console
Console to include DIN storage bin, cup holder, cig lighter/ashtray section and back frame? £36 incl delivery (£37.80 by PayPal)
Originally Posted by Dyney
Price for the centre console and Din storage box?
Scooby Regular
Joined: Dec 2004
Posts: 119
Likes: 0
From: Kendal, North west
plastic piece that goes behind steering wheel ???
not sure of its name but makes the cover up with top part behind steering wheel, i am after tha bottom piece, (WHERE THE IGNITON BARREL SITS) but not the barrel
thanks
steve
not sure of its name but makes the cover up with top part behind steering wheel, i am after tha bottom piece, (WHERE THE IGNITON BARREL SITS) but not the barrel
thanks
steve
Scooby Regular
Joined: Jul 2005
Posts: 67
Likes: 0
hi - im after a cheap petrol tank (condition not important as it will be cut into tiny pieces fo a project) complete with pump, sender etc cna you give me a price. cheers
richbaker78@hotmail.com
richbaker78@hotmail.com
Scooby Regular
Joined: Jul 2004
Posts: 198
Likes: 0
From: WOODFORD HALSE
parts
how much for o2 lamdar sensor and maf sensor??
Originally Posted by CMA
Unfortunately my 11 year old 5 door WRX JDM spec import has come to the end of the line. Car is in Northants and I can take PayPal
(Agreed price plus 5% to cover commissions.)
Nearly all standard parts are available but you need to note the following:
The engine has a noisy big end, not always audible but still there and the shell has some damage around the front left chassis leg. The bumper is also damaged and there are no standard fog lights. Gearbox was only rebuilt 40,000 miles ago by Autosportif with a new gear set (with rear diff makes a good grearing down option for UK car - who needs 140+ mph top when you can get to 130 mph like a rocket on the same power?) All panels are straight but ali bonnet would need a respray even if going on a silver car. Driver's seat has a small cigarette burn and some damage on the outside side roll. (Anyone that knows me, the K&N induction has gone already.)
Upgrades in addition to standard parts available include:
4 pot calipers with half worn discs and nearly new standard Subaru pads
Rear calipers for 18mm vented discs (off a Legacy Turbo so same pads as non vented rear Impreza discs) discs are worn but useable and no pads
Terratrip 303+ rally trip computer
Centre console insert storage box to make up for removing double height Jap radio
Sump guard (mounts on welded in tube between front of chassis rails, dimensions available)
Spare intercooler
OZ twin plate clutch (part worn) with lightened fly wheel and slave cylinder conversion kit
HKS turbo timer
HKS boost gauge with steering colunm mount bracket
Set of steering column stalks
STi back box
Toad Cat 1 alarm
96MY standard gear shift (Had a Prodrive QS fitted to my previous car)
2 sets 16" wheels as fited to 98 and 99MY UK cars, one set with tyres (2 new Ferderals and 2 25% worn Pirelli P6000s) and one set without.
PLEASE NOTE:
I will be breaking this car over a few weeksand I may need to be able to drive it still in teh next 10 days so not everything can be sent straight away. I'll give approx delivery time if I can.
(Agreed price plus 5% to cover commissions.)
Nearly all standard parts are available but you need to note the following:
The engine has a noisy big end, not always audible but still there and the shell has some damage around the front left chassis leg. The bumper is also damaged and there are no standard fog lights. Gearbox was only rebuilt 40,000 miles ago by Autosportif with a new gear set (with rear diff makes a good grearing down option for UK car - who needs 140+ mph top when you can get to 130 mph like a rocket on the same power?) All panels are straight but ali bonnet would need a respray even if going on a silver car. Driver's seat has a small cigarette burn and some damage on the outside side roll. (Anyone that knows me, the K&N induction has gone already.)
Upgrades in addition to standard parts available include:
4 pot calipers with half worn discs and nearly new standard Subaru pads
Rear calipers for 18mm vented discs (off a Legacy Turbo so same pads as non vented rear Impreza discs) discs are worn but useable and no pads
Terratrip 303+ rally trip computer
Centre console insert storage box to make up for removing double height Jap radio
Sump guard (mounts on welded in tube between front of chassis rails, dimensions available)
Spare intercooler
OZ twin plate clutch (part worn) with lightened fly wheel and slave cylinder conversion kit
HKS turbo timer
HKS boost gauge with steering colunm mount bracket
Set of steering column stalks
STi back box
Toad Cat 1 alarm
96MY standard gear shift (Had a Prodrive QS fitted to my previous car)
2 sets 16" wheels as fited to 98 and 99MY UK cars, one set with tyres (2 new Ferderals and 2 25% worn Pirelli P6000s) and one set without.
PLEASE NOTE:
I will be breaking this car over a few weeksand I may need to be able to drive it still in teh next 10 days so not everything can be sent straight away. I'll give approx delivery time if I can.
Hi,
Could you supply the following? What would the cost be including postage?
To fit MY95. All parts black.
4 door pull inserts
4 door lever back plates
Passenger side front air vent surround
Drivers side front air vent surround
Gear lever surround
Cup holder tray
Centre air vent/heater controls surround
Drivers instrument binnacle surround (with the switch holes in)
Thanks. Andrew.
Could you supply the following? What would the cost be including postage?
To fit MY95. All parts black.
4 door pull inserts
4 door lever back plates
Passenger side front air vent surround
Drivers side front air vent surround
Gear lever surround
Cup holder tray
Centre air vent/heater controls surround
Drivers instrument binnacle surround (with the switch holes in)
Thanks. Andrew.
Cooking on Calor
iTrader: (23)
Joined: Oct 2001
Posts: 23,346
Likes: 7
From: in a house full of girls!
what are the seats like? do you have the lower rear spoiler? price on both please, pm me if prefered?
j4mou@hotmail.com
jamo
j4mou@hotmail.com
jamo
Scooby Regular
Joined: Nov 2005
Posts: 753
Likes: 0
From: 1997 2000 GL'T=Grand Lux + Turbonator
Is Console Sold?
Hi CMA,
I have just returned from holiday and found my WRX Type RA 1994(Recent Import) has been broken into. They took a crap radio which was tuned to Jap frequencies, but demolished the centre console. Therefore I need:
"Console to include DIN storage bin, cup holder, cig lighter/ashtray section and back frame? £36 incl delivery (£37.80 by PayPal)" plus the plastic surround which goes at bottom of gearstick gator.
If its avaliable I would pay straight away on Paypal. I also need the battery retaining bracket, and the two long bolts which fix to the battery tray. (Not sure why the nicked theses?!?)
Thanks,
Sy.
I have just returned from holiday and found my WRX Type RA 1994(Recent Import) has been broken into. They took a crap radio which was tuned to Jap frequencies, but demolished the centre console. Therefore I need:
"Console to include DIN storage bin, cup holder, cig lighter/ashtray section and back frame? £36 incl delivery (£37.80 by PayPal)" plus the plastic surround which goes at bottom of gearstick gator.
If its avaliable I would pay straight away on Paypal. I also need the battery retaining bracket, and the two long bolts which fix to the battery tray. (Not sure why the nicked theses?!?)
Thanks,
Sy.
