any tips running an Ethernet cable from upstairs to downstairs tv
To go through the floorboards?
|
Use powerlines.
|
Use wireless.
|
Above is most convenient way to do this or just stick a small PC under the tv and go via small gigabit switch (fanless ofc).
Also checkout UbiQuiti UniFi Pro depending on what your wireless device(s) support protocol / standard wise |
Originally Posted by tony de wonderful
(Post 11318590)
Use powerlines.
|
I use these TP-Link power lines:
http://uk.tp-link.com/products/detai...L-WPA4220T+KIT Desktop media server is 2 floors up (on a separate ring), TV and HDD recorder on the ground floor. I can stream media from the desktop to the downstairs tv (and mobile devices) via DLNA. I can also backup from my HDD recorder to my media server using media monkey and handbrake. |
Originally Posted by riiidaa
(Post 11318619)
how many houses are there where upstairs would be on same ring as downstairs?
|
Originally Posted by paulr
(Post 11318585)
To go through the floorboards?
Another option, depending on where stuff is, is to run the cable down the outside wall of your house. The cables are waterproof up to the point you strip back the insulation to fit a socket and this would be indoors. |
Yes, pull two (or more) lines through, same effort if taped together, and gives you redundancy in case one gets snagged or bitten through etc
To do it properly use hard wired (cat5/6) connections anything else is a bodge |
Originally Posted by Miniman
(Post 11318655)
I use powerlines on different rings.
I do the same and don't have any issues. |
Powerlines are by far the easiest. I use a few Netgear Nano 500mps ones spread around the house and achieve pretty good speeds.
|
Originally Posted by Miniman
(Post 11318655)
I use powerlines on different rings.
Yes that will work but the speed wont be as good as it will then go via your fuse board. What are you planing on using this connection for ? |
The only downside I find on powerlines is ffd/rwd is not too responsive when streaming media. Playing an mp4 movie is fine, you just have to endure any ad breaks ;)
|
Originally Posted by SJ_Skyline
(Post 11318728)
The only downside I find on powerlines is ffd/rwd is not too responsive when streaming media. Playing an mp4 movie is fine, you just have to endure any ad breaks ;)
Ive just changed to 500mps tp links .. I can stream HD3d from the NAS in the loft, to both the upstairs HDTV And to the 3D DVD & TV downstairs in the front room TP do say that if you have surge filters in your system, than can affect the signal Mart |
Expanding on the original question a bit, anyone out there recommend a system for distributing through the whole house?
Have an old farm house thats undergoing rennovation just now, and currently have a BT router in the living room, the wifi signal doesnt get very far cause of the thick walls and would like internt access in most of the rooms both downstairs and upstairs Most of the floorboards are up so cat5/6 hard wiring would be easy to do just now, something I'd do myself. Theres about 8 rooms I'd like to wire up. So the BT router having only 4 ports wont do the job... Will some sort of server based router do? Im not really clued up on that side of things? Any help would be appreciated! |
Use power lines. I have them connected from house to garage on separate rings then run a 80 metre cat5 cable to outbuilding. Even though I have slowish Internet in the house of 4mb, I can stream video in the outbuilding :)
|
Originally Posted by mart360
(Post 11318759)
Sorry, you must have probs elsewhere,
Ive just changed to 500mps tp links .. I can stream HD3d from the NAS in the loft, to both the upstairs HDTV And to the 3D DVD & TV downstairs in the front room TP do say that if you have surge filters in your system, than can affect the signal Mart |
Originally Posted by Road Warrior
(Post 11318766)
Expanding on the original question a bit, anyone out there recommend a system for distributing through the whole house?
Have an old farm house thats undergoing rennovation just now, and currently have a BT router in the living room, the wifi signal doesnt get very far cause of the thick walls and would like internt access in most of the rooms both downstairs and upstairs Most of the floorboards are up so cat5/6 hard wiring would be easy to do just now, something I'd do myself. Theres about 8 rooms I'd like to wire up. So the BT router having only 4 ports wont do the job... Will some sort of server based router do? Im not really clued up on that side of things? Any help would be appreciated! http://www.ebuyer.com/411324-netgear...h-fs208-100uks |
Road Warrior, I'm a fellow Scottish farm building networker.
I have a BT Home Hub at the master socket, and its gigabit port is hooked up to a gigabit 5 port switch. From here four patch cables link to a 4 way ethernet socket on the wall and from there the ethernet cables go in various directions to the garage, workshop, dining room, lounge where there is a gigabit router with DHCP turned off plugged into an ethernet socket on the wall. They all share the same SSID, password and security, but on non overlapping channels, some are dual band. Result is excellent wired and wireless over 6000 sqft, although it does need five wireless zones to accomplish it. There are three distribution boards with countless ring mains, but all on the same electric meter and phase. Powerline (500 claimed) did work but only to about a real 10 megabits per second file transfer speed. Now on a large file copy it is about 900 megabits per second. Overkill for our 6.5 megabits internet connection, but good for networking domestic and business requirements. For going through a typical floorboard, wireless is usually fine. Stone walls of any substance, forget it. |
Originally Posted by wrx5343
(Post 11318793)
|
Originally Posted by john banks
(Post 11318806)
Personally would and did go Gigabit which is only a few pounds more, but if just for present web use then 100 megabits will be fine, and if the wires are good you can always change the equipment later.
I have this myself http://www.dabs.com/products/netgear...itch-3F1V.html |
|
Thanks for you help guys, has now given me something to go on :)
Actually looks a bit easier than I had anticipated! John Banks, yeah stone walls are a killer, and this house has been added to over the years so some previous external walls are now internal, so it soon slows down the signal! Good idea having other routers placed about for wireless too! Hadnt thought of that.. Wont be using powerlines, the wiring is dodgy enough as it is at the minute!! :P Thanks again! |
ive got loads of ethernet run through floorboards making my place futureproof. Best way of sending data around the house. How good they are the powerlines I'd always prefer hardwired over using seperate to power ring
But that seems the best method for you unless lifting the floorboards yourself to feed cat5 . |
Originally Posted by wrx5343
(Post 11318708)
Yes that will work but the speed wont be as good as it will then go via your fuse board.
What are you planing on using this connection for ? |
powerline plugs.
|
Originally Posted by chet123
(Post 11318844)
ive got loads of ethernet run through floorboards making my place futureproof. Best way of sending data around the house. How good they are the powerlines I'd always prefer hardwired over using seperate to power ring
But that seems the best method for you unless lifting the floorboards yourself to feed cat5 . |
Thanks for all the advice guys.
|
And don't forget don't kink the wire two to three inch bends as int wire will cut through its own insulation if any less.
|
All times are GMT +1. The time now is 07:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands