STI V4 PROJECT
 

I bought this car as a fresh import 12 months ago completely standard, with the intention of wheels suspension etc and to keep the engine fairly standard with just basic breathing mods, so would make a ideal trackday car!!!

The day i got it registered the clutch started slipping so back in the garage, over 2 nights we put an Exedy stage 1 clutch kit, and a full service, on the test drive actually no more than 5 miles in the dreaded bottom end knock.. after stripping the engine it looked like oil pump failure and the bottom end was scrap.
So this is where it all started, what was going to be a straight forward bottom end swap turned in a small budget build which i have tried to document along the way.

The car is far from finished as you will see in the pictures and there are still a few bits to do..

The engine..
STI V7 bottom end
HKS headers with up-pipe (wrapped)
Graham Goode 11mm modified oil pump
Standard STI V4 heads ported and polished Re shimmed and all valve seats recut
RCM top end gasket kit
Turbo back 3" exhaust
340 lph fuel pump
Fuel lab pressure regulator
800cc Denso injectors
TD05-25G BILLET ANTI SURGE TURBO
3 port boost solenoid
Front mount intercooler
Re furbed inlet manifold finshed in standard matt red

Some pics along the way

http://s941.photobucket.com/user/Fra...005/slideshow/

Absolutely beautiful mate. Is it mapped yet on the 25g?

Thanks mate, no she is not finished but is almost there, we have spoken to Jolly Green Monster who will be doing the ESL in due course.

Sweet. I look forward to this mate. Heard good stuff about these kinugawa turbos. Will be looking into ine myself. What are you hoping to get?

After weighing up my options this seemed to be the best value, it may turn out to be un reliable but spec for money they seem ok so only time will tell, hoping for 400 ish anymore and i think i may have transmission probelms.

Let me know how you get on I'm looking at a 20g or similar for my 2.1 once it's run in.

Look forward to it.

Where did the turbo come from? Unusual numbering

The turbo was bought direct from kinugawa billet item, mitsi bearings still jounal type, looks ok quality only time will tell!!

Okay brill. Yep some of theirs really good and some not ;)

Thought i'd share some pictures of the head work some before and after photos.

http://s941.photobucket.com/user/Fra...ti%204%20Heads

Jgm, how do you know if the kinugawa turbo is a good one or not? They look very keenly priced.

Tim.

you dont until it works or not

Beautiful car mate, looking forward to your results

Car looks nice mate,should make some nice power too.SJ.

Thanks guys for your nice comments, i will be glad when its back on the road i have spent all my time working on it rather than driving it!!! i wiull get some more pics loaded up soon..