ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   ScoobyNet General (https://www.scoobynet.com/scoobynet-general-1/)
-   -   Any re-mappers in Warrington? (https://www.scoobynet.com/scoobynet-general-1/984790-any-re-mappers-in-warrington.html)

AndyRal 07 September 2013 07:01 PM

Any re-mappers in Warrington?
 
as title states,

Looking for a decent place to remap my scoob in warrington or nearby wa5

thanks.

Midlife...... 07 September 2013 07:06 PM

............there are a number of mappers that travel. :D

Shaun

serpico 07 September 2013 08:22 PM

JGM, Andy Forrest, Andrew Carr, racedynamix to name a few

ian.e 07 September 2013 08:23 PM

Graham Martin, aka enginemapper is based at Group B Motorsport in Queensferry, just outside Chester. :thumb:

JGlanzaV 07 September 2013 08:25 PM

Aren't tuning developments up there? Used them lots for my starlet stuff top guys and have a very good reputation!

faz27 07 September 2013 08:42 PM

i use andy carr he comes to scoobyspares at fleetwood near blackpool when needed i think hes from preston. not too far from warrington

blackpoolrock 07 September 2013 11:44 PM

+1 for Andrew Carr send Speedflash a pm on here to book it !

AndyRal 08 September 2013 09:25 AM

Thanks everyone got a good list there haha :)


Originally Posted by JGlanzaV (Post 11202556)
Aren't tuning developments up there? Used them lots for my starlet stuff top guys and have a very good reputation!

Seen the decals for that plastered all over a little glanza the other day

TonyBurns 08 September 2013 09:26 AM

There are a few good mappers, just depends how far you want to travel?
Engine mapper is probably your closest and best option, if you want to travel the slightly overlooked but very good Steve Simpson up at TEG motorsport in Lancashire also gets my vote :thumb:

rallypair 08 September 2013 11:29 AM

Graham has left GroupB motorsports.

stira2 09 September 2013 12:46 PM


Originally Posted by rallypair (Post 11203037)
Graham has left GroupB motorsports.

Have they still got someone who maps?

blackpoolrock 09 September 2013 01:54 PM


Originally Posted by TonyBurns (Post 11202913)
There are a few good mappers, just depends how far you want to travel?
Engine mapper is probably your closest and best option, if you want to travel the slightly overlooked but very good Steve Simpson up at TEG motorsport in Lancashire also gets my vote :thumb:

Pretty sure Andrew does there mapping pal !

TonyBurns 09 September 2013 02:16 PM


Originally Posted by blackpoolrock (Post 11204156)
Pretty sure Andrew does there mapping pal !

No, id pretty much say Steve does their mapping as he owns the place ;)

blackpoolrock 09 September 2013 02:18 PM


Originally Posted by TonyBurns (Post 11204176)
No, id pretty much say Steve does their mapping as he owns the place ;)

Steve does own it but like I said I think you'll find Andrew has recently started doing the mapping

blackpoolrock 09 September 2013 02:23 PM

Confirmed Andrew does the mapping , Stuart ownes teg not Steve !

TonyBurns 09 September 2013 02:37 PM

Well that's me not going there then, I want a decent mapper doing my work

AndyRal 09 September 2013 09:01 PM

Getting mapped tomorrow at a local place called Power Tuning. hopefully will be all better tomorrow!

Dave-W- 10 September 2013 08:41 PM


Originally Posted by TonyBurns (Post 11204193)
Well that's me not going there then, I want a decent mapper doing my work


tony your throwing a lot of digs about andy carr why ?

I have had mine mapped by andy from standard up to 450/400 over the past 4 years with no issues and lots of good advise and workmanship and I know plenty more people that use andy with the same feeling

I think if you have something to say about him say it or stop the snide remarks :thumb:

blackpoolrock 10 September 2013 09:04 PM


Originally Posted by Dave-W- (Post 11205565)
tony your throwing a lot of digs about andy carr why ?

I have had mine mapped by andy from standard up to 450/400 over the past 4 years with no issues and lots of good advise and workmanship and I know plenty more people that use andy with the same feeling

I think if you have something to say about him say it or stop the snide remarks :thumb:

+ 1

Andrew took my car from standard to 450/400 give or take a few - and he's just done my new car - always gives advice, always helps, granted he might not always answer the phone but he always gets back to you.

Also if you thing The mapper at teg was that good why would teg who have a fantastic name change to Andrew Carr ? Trouble with lots of people is they want a map, they want it now, they want it done in minuets and they want millions of bhp with no supporting mods. Andrew is a great mapper

richgreenscooby1 10 September 2013 10:57 PM

Graham (engine mapper ) has left groupb , but they have steve Simpson .. (Mr simtek ) there 1 day a week doing there mapping ..

blackpoolrock 10 September 2013 11:19 PM


Originally Posted by richgreenscooby1 (Post 11205774)
Graham (engine mapper ) has left groupb , but they have steve Simpson .. (Mr simtek ) there 1 day a week doing there mapping ..

There you go tony you can go there !

serpico 10 September 2013 11:20 PM


Originally Posted by Dave-W- (Post 11205565)
tony your throwing a lot of digs about andy carr why ?

I have had mine mapped by andy from standard up to 450/400 over the past 4 years with no issues and lots of good advise and workmanship and I know plenty more people that use andy with the same feeling

I think if you have something to say about him say it or stop the snide remarks :thumb:

Agreed. I've had no issues with Andrew over the years. Like I asked in the other thread Tony, what evidence is there to substantiate these claims?

Midlife...... 11 September 2013 03:27 PM

Who maps at "Power Tuning" then where the OP is going?

Shaun

TonyBurns 11 September 2013 03:39 PM


Originally Posted by Dave-W- (Post 11205565)
tony your throwing a lot of digs about andy carr why ?

I have had mine mapped by andy from standard up to 450/400 over the past 4 years with no issues and lots of good advise and workmanship and I know plenty more people that use andy with the same feeling

I think if you have something to say about him say it or stop the snide remarks :thumb:

I'm not making snide remarks, I want a decent mapper and I don't count Andy as one of those, especially after the issues with one of the LADS members and the "racerom", plus some of the work isn't the best, its average, the poor guy just who just had his car mapped to "335/335", that's not good for a new age sti with full decat and induction, you should be seeing 15+bhp and torque more than that.

Like I said, I want a decent mapper doing my cars.

Maz 11 September 2013 03:50 PM


Originally Posted by AndyRal (Post 11204592)
Getting mapped tomorrow at a local place called Power Tuning. hopefully will be all better tomorrow!

Is it a company called Power Tune in Widnes?

blackpoolrock 11 September 2013 04:48 PM


Originally Posted by TonyBurns (Post 11206305)
I'm not making snide remarks, I want a decent mapper and I don't count Andy as one of those, especially after the issues with one of the LADS members and the "racerom", plus some of the work isn't the best, its average, the poor guy just who just had his car mapped to "335/335", that's not good for a new age sti with full decat and induction, you should be seeing 15+bhp and torque more than that.

Like I said, I want a decent mapper doing my cars.

I new you weed on about him , that would be the same person that slagged him for ages then, and I know this to be true, got Andrew to re map it !!!!!

TonyBurns 11 September 2013 04:50 PM


Originally Posted by blackpoolrock (Post 11206373)
I new you weed on about him , that would be the same person that slagged him for ages then, and I know this to be true, got Andrew to re map it !!!!!

And then totally fcuked it up..... then didn't get back, answer texts or calls, yup (not my car btw, Andrew has never mapped one for me and as above, wouldn't want him to either)
But do a search on here for Racerom and Carberry, the poor guy in the states was having a real good go at AC for stealing his rom and pushing it as his own.

blackpoolrock 11 September 2013 04:56 PM


Originally Posted by TonyBurns (Post 11206305)
I'm not making snide remarks, I want a decent mapper and I don't count Andy as one of those, especially after the issues with one of the LADS members and the "racerom", plus some of the work isn't the best, its average, the poor guy just who just had his car mapped to "335/335", that's not good for a new age sti with full decat and induction, you should be seeing 15+bhp and torque more than that.

Like I said, I want a decent mapper doing my cars.

That poor guy that just got 335/335 !!!!!! Tony you sound stupid now ! How on earth can you say what he should of got and what he actually got ! I've gone from one dyno straight to another and got a difference of 25bhp !

blackpoolrock 11 September 2013 04:59 PM


Originally Posted by TonyBurns (Post 11206374)
And then totally fcuked it up..... then didn't get back, answer texts or calls, yup (not my car btw, Andrew has never mapped one for me and as above, wouldn't want him to either)
But do a search on here for Racerom and Carberry, the poor guy in the states was having a real good go at AC for stealing his rom and pushing it as his own.

No - he ****ed it but driving it with a problem ! When it was fixed who did he get to re map it ?????????? Andrew !

You need to give your head a wobble tony claiming a guy with a decay and induction should get 350 - know one makes claims like that

Maz 11 September 2013 05:01 PM


Originally Posted by TonyBurns (Post 11206374)
And then totally fcuked it up..... then didn't get back, answer texts or calls, yup (not my car btw, Andrew has never mapped one for me and as above, wouldn't want him to either)
But do a search on here for Racerom and Carberry, the poor guy in the states was having a real good go at AC for stealing his rom and pushing it as his own.

Tony with respect you seem awfully well informed about someone else's situation. I think your assertions may carry more credence if they were coming from the horse's mouth.
With regard to the Carberry issue, it wasn't stealing as that program was there for all to use. The original creator of the software just wanted recognition. He and Andrew Carr came to a mutually acceptable agreement. Your allegation of theft is not only untrue it's libellous.


All times are GMT +1. The time now is 01:27 PM.


© 2024 MH Sub I, LLC dba Internet Brands