can i fit an oem recirc valve to a front mount?
just bought myself a hdi front mount but it comes with a vta valve,im not keen on the dump valve noise so i would like to fit my oem valve,can this be done?
its a blob wrx cheers |
Yes it can , I make the adaptor plates to fit oem re circ valves onto a fmic
Have a look at my group buy for pictures and details Regards Neil |
Ive done this on my front mount, as above just need adapter plate got mine off ebay.
Can send pic if you want? |
1 Attachment(s)
i got my adaptor off neil,very nicely made and does the trick perfect ;)
heres mine fitted to show :thumb: Attachment 13507 |
yup I run the oem recirc dump valve on a hdi fmic
|
also its not just the adaptor plate you need you also need a length of pipe that goes from the dv to the inlet.
|
Jake - cheers matey , hope to see good results from yours on wednesday
:) Tubby - thats correct you need a short piece of silicon hose to connect the 2, when i make mine, i machine the adaptor pipe 29mm diameter,so a piece of 30mm bore pipe fits nicely:thumb: |
yeah fingers crossed for wedenesday :lol1:
|
|
Originally Posted by tubbytommy
(Post 11196383)
http://i890.photobucket.com/albums/a...ps9bfc42a5.jpg
http://i890.photobucket.com/albums/a...ps4571d7ce.jpg |
1 Attachment(s)
|
Originally Posted by tubbytommy
(Post 11196383)
http://i890.photobucket.com/albums/a...ps9bfc42a5.jpg
http://i890.photobucket.com/albums/a...ps4571d7ce.jpg |
Originally Posted by the shreksta
(Post 11196518)
looks good tommy,i see your intercooler pipes run under-neath,any problems?
its the standard newage hdi intercooler set up, they don't hang low enough to catch unless you drive either side of one of those silly half speed bumps. I run coilovers too, but the splitter is lower than the pipe. its a pain in the ass to fit though and the hdi isn't one of the easiest to install due to having to cut part of the bumper bar out with an angle grinder. other intercoolers come with replacement bumper bars so its a bolt on job, the hdi isnt |
Originally Posted by tubbytommy
(Post 11196522)
its the standard newage hdi intercooler set up, they don't hang low enough to catch unless you drive either side of one of those silly half speed bumps.
I run coilovers too, but the splitter is lower than the pipe. its a pain in the ass to fit though and the hdi isn't one of the easiest to install due to having to cut part of the bumper bar out with an angle grinder. other intercoolers come with replacement bumper bars so its a bolt on job, the hdi isnt |
what power can the standard recirculating valve take before they leak?
|
I have a fmic and mapped my car to run without a dump valve, the sound you get from the turbo stall (some ppl call it waste gate chatter - it isn't), sounds awesome!
I've got a TD05 18G, some tubbys cant manage to run without a dump valve so its also depending on which tubby you have. |
Originally Posted by alex_00s
(Post 11196571)
I have a fmic and mapped my car to run without a dump valve, the sound you get from the turbo stall (some ppl call it waste gate chatter - it isn't), sounds awesome!
I've got a TD05 18G, some tubbys cant manage to run without a dump valve so its also depending on which tubby you have. A proper squirrel mincer !! |
this is the one neil (whitenoise) made me all fitted
|
|
All times are GMT +1. The time now is 09:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands