can i fit an oem recirc valve to a front mount?
01 September 2013, 12:10 AM
#1
can i fit an oem recirc valve to a front mount?
just bought myself a hdi front mount but it comes with a vta valve,im not keen on the dump valve noise so i would like to fit my oem valve,can this be done?
its a blob wrx
cheers
its a blob wrx
cheers
01 September 2013, 11:28 AM
#7
Scooby Regular
iTrader: (8)
Join Date: Sep 2010
Location: Reading,Berkshire
Posts: 907
Likes: 0
Received 0 Likes
on
0 Posts
Jake - cheers matey , hope to see good results from yours on wednesday
Tubby - thats correct you need a short piece of silicon hose to connect the 2, when i make mine, i machine the adaptor pipe 29mm diameter,so a piece of 30mm bore pipe fits nicely
Tubby - thats correct you need a short piece of silicon hose to connect the 2, when i make mine, i machine the adaptor pipe 29mm diameter,so a piece of 30mm bore pipe fits nicely
Trending Topics
01 September 2013, 06:55 PM
#13
its the standard newage hdi intercooler set up, they don't hang low enough to catch unless you drive either side of one of those silly half speed bumps.
I run coilovers too, but the splitter is lower than the pipe.
its a pain in the *** to fit though and the hdi isn't one of the easiest to install due to having to cut part of the bumper bar out with an angle grinder.
other intercoolers come with replacement bumper bars so its a bolt on job, the hdi isnt
01 September 2013, 06:57 PM
#14
its the standard newage hdi intercooler set up, they don't hang low enough to catch unless you drive either side of one of those silly half speed bumps.
I run coilovers too, but the splitter is lower than the pipe.
its a pain in the *** to fit though and the hdi isn't one of the easiest to install due to having to cut part of the bumper bar out with an angle grinder.
other intercoolers come with replacement bumper bars so its a bolt on job, the hdi isnt
I run coilovers too, but the splitter is lower than the pipe.
its a pain in the *** to fit though and the hdi isn't one of the easiest to install due to having to cut part of the bumper bar out with an angle grinder.
other intercoolers come with replacement bumper bars so its a bolt on job, the hdi isnt
01 September 2013, 07:30 PM
#16
Scooby Regular
iTrader: (18)
Join Date: May 2006
Location: Middx / Herts / Bucks / Essex
Posts: 3,420
Likes: 0
Received 1 Like
on
1 Post
I have a fmic and mapped my car to run without a dump valve, the sound you get from the turbo stall (some ppl call it waste gate chatter - it isn't), sounds awesome!
I've got a TD05 18G, some tubbys cant manage to run without a dump valve so its also depending on which tubby you have.
I've got a TD05 18G, some tubbys cant manage to run without a dump valve so its also depending on which tubby you have.
01 September 2013, 11:12 PM
#17
Scooby Regular
iTrader: (8)
Join Date: Sep 2010
Location: Reading,Berkshire
Posts: 907
Likes: 0
Received 0 Likes
on
0 Posts
I have a fmic and mapped my car to run without a dump valve, the sound you get from the turbo stall (some ppl call it waste gate chatter - it isn't), sounds awesome!
I've got a TD05 18G, some tubbys cant manage to run without a dump valve so its also depending on which tubby you have.
I've got a TD05 18G, some tubbys cant manage to run without a dump valve so its also depending on which tubby you have.
A proper squirrel mincer !!
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM