purge valve delete
1 Attachment(s)
i'v read a few post's about removing the valve just to tidy up the bay, mine was leaking when i did a pressure test so it had to go :lol1:
this is the purge valve T piece. Attachment 57968 and this is when i removed it an tidied it up. http://i1302.photobucket.com/albums/...ps6069fda0.jpg |
Any write ups? How was this done? I'm curious:wonder:
|
i removed the T piece and basically blanked off the vac line to the manifold and the one to the air intake and then joined the two smaller hoses together with a longer piece of hose,
but i have read the other 2 smaller hoses can be left to vent to atmosphere. make sure you leave the valve where the electrical connector is connected to plugged in as it may throw a ECL if removed an unplugged. hope this helps :D |
I've binned the lot, along with the tank vent lines and the charcoal canister
|
found this thread its exactly what i need to do so i can run my breatherless intake pipe. can someone please confirm this is the correct way to do it short o doing a total carbon canister removal
|
which ones correct the video show the intake manifold being blanked off but the thread above the guy has linked the intake manifold back to the pipe off the solenoid |
All times are GMT +1. The time now is 09:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands