ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   air intake question (https://www.scoobynet.com/general-technical-10/971535-air-intake-question.html)

steven bass 11 April 2013 07:19 PM

air intake question
 
Im still having issues with high
idle n i dont know whether this has anything to do with it but.....

When i unplug my iacv my idle goes down but is a bit lumpy n still a little high. When its plugged in i can hear the air filter humming away. Am i meant to hear the air filter sucking away when on idle? I thought it was usually quiet until under acceleration. Its like someone humming while stood right next to me. I know the iacv is fine as it came off a running car.

adamroutley 11 April 2013 11:35 PM

I can't hear my induction until I'm spooling. On idle and pottering around below 2k can't hear it one bit.

steven bass 12 April 2013 07:24 AM

I forgot to mention that this is with the bonnet open. But still i shouldnt hear it right?

steven bass 12 April 2013 10:53 PM

Anybody know why? My idle is 1500 with the iac valve adjusted so its shut or just about shut. Maybe my car is gettin too much fuel (it is running rich...hc=10% ) so it pulling in air to compensate? If so anyone know what will cause this and how to find out?

dj219957 12 April 2013 10:56 PM

is the tps set correctly at 4.7v.

steven bass 12 April 2013 10:58 PM

Yes i checked it n was 4.7

steven bass 12 April 2013 11:06 PM

If i unplug either tps or iacv or both together the revs go down but idles lumpy. Iacv is off a perfectly working car. Done all the usual idle checks inc. Vac leaks. But now im thinking theres extra fuel going in explaining why my car sucks the air in at idle.

dj219957 13 April 2013 09:54 AM

what voltage do you have on the tps? small connector on ecu top right green wire.

steven bass 13 April 2013 09:58 AM

To be honest ive not looked at the ecu side. Im going to look shortly after i got ma daughter from ballet. What is the voltage meant to be?

sonic93 13 April 2013 10:09 AM

I hear my filter with head in bonnet.

steven bass 13 April 2013 10:25 AM

Oh someone else does too. Back to being baffled then.
My ecu has 4 connectors, looking at them from connector side they go...large conector...small....smallest....large. the smallest one has a green wire on top row second from right. The one furthest right is black. Do i have the right wire? Also do i need engine off or on.... or ignition off or on?

steven bass 13 April 2013 10:32 AM

Right got it. Its 4.7 at the ecu. Any other ideas. Also do you know what the idle control switch is. Its code 42. I know what the idle control valve is and thats code 24.

steven bass 13 April 2013 12:03 PM

Also when driving about at a steady pace n no thrashing i get around 11mpg round town n 25 mpg out of town. Thats got to be high even for a scoob


All times are GMT +1. The time now is 02:57 PM.


© 2024 MH Sub I, LLC dba Internet Brands